A pressure cooker gasket has to match the cooker’s lid and sealing groove—not just look about the right size. The picks below cover specific Fagor, Fissler, and NuWave models, plus a 28 cm replacement ring for compatible aluminum cookers. Before ordering, compare the part number and measurements with your old gasket and your cooker’s manual; a poor fit can prevent the cooker from sealing properly.
Quick Comparison
| Product | Best For | Key Fit Details |
|---|---|---|
| Cutetool 998010441 Fagor Gasket | Selected Fagor 8- and 10-quart stovetop cookers | Replaces FG-998010441R / 998010441; 9.8-inch ID, 10.8-inch OD |
| Fissler 26 cm Silicone Gasket | Specific older Fissler cooker and skillet models | For 26 cm cookers; model and production-era limits apply |
| XZW 28 cm Silicone Sealing Rings, 2-Pack | Compatible 28 cm aluminum pressure cookers | Size refers to the pot’s inner diameter; two rings included |
| GJS Gourmet NuWave Nutri-Pot Gasket | NuWave Nutri-Pot 6Q, model 33101 | Third-party replacement made from food-grade silicone |
| Cutetool M18804554 Fagor Gasket | Selected Fagor 22 cm stovetop cookers | Replaces FAG-009 / 95X8083; 22 cm ID, 24 cm OD |
Our Picks: Best Silicone Gasket For Pressure Cooker reviews
Cutetool 998010441: A Fagor Replacement for 8- and 10-Quart Cookers
This gray silicone ring is made for selected Fagor 8- and 10-quart stovetop pressure cookers. It replaces part numbers 998010441 and FG-998010441R, and the listed fit includes several Fagor lines, such as Duo, Splendid, Futuro, Elite, Cayenne, Rapida, and Chef. Check the full model details and part number before buying, since a shared brand name does not guarantee a shared gasket size.
The listed measurements are 9.8 inches for the inner diameter and 10.8 inches for the outer diameter. That makes this a more specific choice than a generic ring sold by diameter alone. It sits in the lid’s sealing groove, where it helps limit steam escaping around the lid and supports normal pressure buildup.
Installation calls for a cool, fully depressurized cooker. Remove the old ring, clean the groove, and press the replacement evenly into place. Its main drawback is its narrow compatibility: it is not a general-purpose gasket for every Fagor cooker, or for other brands.
Pros:
- Lists replacement part numbers for fit checking.
- Names compatible Fagor 8- and 10-quart cooker lines.
- Provides both inner and outer diameter measurements.
- Flexible silicone design for the lid’s sealing groove.
Cons:
- Fit is limited to compatible models and dimensions.
- Does not include a second gasket in the supplied product details.
Verdict: Choose this ring if your Fagor cooker’s model and existing gasket match the listed part number and dimensions; otherwise, keep looking for a model-specific fit.
Fissler 26 cm Gasket: An Original Part for Select Older Models
This is a genuine Fissler replacement gasket intended for 26 cm pressure cookers and pressure skillets. The listed fit includes all vitaquick models from 2009 or earlier, Blue Point models, vitavit Royal models, and Magic models. Those model and production-era limits matter, so confirm your cooker’s exact name and size before choosing it.
Fissler advises using original replacement parts for the safety and longevity of its products. That makes this an especially relevant option if you want to stay with the manufacturer’s specified part rather than choose a third-party alternative. The product information does not give inner and outer measurements, so use the 26 cm cooker size and model compatibility—not an assumed gasket diameter—to check fit.
The listed compatibility is narrow, and the product data indicates it is not currently available. Availability can change, but if you cannot find this part, consult Fissler’s guidance for an approved replacement rather than substituting a ring based only on its diameter.
Pros:
- Genuine Fissler replacement part.
- Lists several specific compatible model families.
- Designed for 26 cm cookers and pressure skillets.
Cons:
- Compatibility depends on the cooker model and, for vitaquick, its production era.
- Product data does not provide inner and outer gasket measurements.
Verdict: This is the clearest fit choice for owners of a listed Fissler model who want an original part, but verify availability and exact compatibility before ordering.
XZW 28 cm Two-Pack: A Size-Based Option for Aluminum Cookers
This two-pack is described as a replacement for aluminum alloy pressure cookers with a 28 cm diameter. The size refers to the inner diameter of the pot, not its outer edge. That distinction is important: measure the cooker as directed by the product listing, and check that the gasket’s shape and sealing groove also suit your lid.
The rings are made from flexible silicone, and the product description says they are washable by hand or on a dishwasher’s upper rack. Two rings can be useful if you want a spare, though the supplied details do not identify specific cooker brands or models. The listing also indicates that this product is not currently available, so check the listing before planning on this as your replacement.
Unlike the Fagor and NuWave options here, this gasket is presented mainly by size and cooker material rather than a model list. That makes careful measurement especially important. A 28 cm pot measurement alone does not confirm that the ring will seat correctly in your lid.
Pros:
- Two sealing rings are included.
- Designed for compatible 28 cm aluminum alloy cookers.
- Product information describes handwashing and upper-rack dishwasher cleaning.
- Flexible silicone is intended to return to shape after compression.
Cons:
- No specific cooker brands or model numbers are listed.
- Pot diameter alone may not confirm a proper lid-groove fit.
Verdict: Consider this two-pack only if your cooker is an aluminum model and its 28 cm inner diameter and lid groove match the listing.
GJS Gourmet: A Third-Party Gasket for the NuWave Nutri-Pot 6Q
GJS Gourmet identifies this replacement as compatible with the NuWave Nutri-Pot 6Q Digital Pressure Cooker, model 33101. It is made from food-grade silicone, according to the supplied product details. The brand also makes clear that the gasket is not made or sold by NuWave, so it is a third-party replacement rather than an original manufacturer part.
This model-specific description makes it easier to narrow down than a generic gasket listing, but the model number still needs to match. The product information recommends replacing the gasket every 18 to 24 months or when deformation is noticed. Treat that as the product’s guidance, and also follow your cooker manual’s maintenance instructions.
Unlike the Fagor options, this ring is intended for an electric cooker rather than a stovetop model. Its main limitation is that the listing names one specific cooker model, and it does not provide gasket dimensions in the supplied details.
Pros:
- Names the NuWave Nutri-Pot 6Q model 33101.
- Made from food-grade silicone, according to the listing.
- Provides a replacement interval recommendation and a deformation-related replacement cue.
Cons:
- Third-party part, not made or sold by NuWave.
- Compatibility is limited to the named model, and no dimensions are provided.
Verdict: This is a focused replacement option for a Nutri-Pot 6Q model 33101 owner who is comfortable with a third-party part and has confirmed the fit.
Cutetool M18804554: A 22 cm Gasket for Selected Fagor Cookers
This gray silicone ring is listed for selected Fagor 22 cm stovetop pressure cooker lids and replaces FAG-009 and 95X8083. Its stated measurements are 22 cm inner diameter and 24 cm outer diameter. The product description names a broad set of compatible Fagor families, including RAPIDX, INNOVA, FUTUR/FUTURE, ARIN, COMBIX, PREMIUMX, and selected Splendid models.
The detailed model list is useful, but the listing also makes clear that the part number and gasket size should be checked before purchase. Some listed cooker capacities vary, so capacity by itself is not enough to establish compatibility. Match your cooker’s exact series or part number, then compare the old ring’s dimensions.
Like the other Fagor replacement here, this gasket fits into the circular groove inside the lid. The installation instructions call for a cool, depressurized cooker, a clean groove, and an even fit without twisting or folding. This may suit someone replacing an aged, hardened, deformed, or damaged ring, but it is not interchangeable with the larger 998010441 model just because both fit Fagor cookers.
Pros:
- Lists replacement part numbers and many compatible Fagor model families.
- Gives both inner and outer measurements.
- Made from flexible silicone for the lid sealing area.
- Includes practical installation guidance.
Cons:
- Only fits compatible 22 cm cooker lids; it is not a universal Fagor gasket.
- Model and part-number details need careful checking before purchase.
Verdict: Choose this over the 998010441 option when your Fagor cooker calls for M18804554, FAG-009, or 95X8083 and the measurements match.
How to Choose a Silicone Pressure Cooker Gasket
Start with the Cooker’s Brand and Model
Look for the model number on the cooker, lid, or manual, then compare it with the replacement gasket’s compatibility list. A brand may sell different gasket sizes across cooker lines, and even similar model names can use different parts. For Fissler, the listed production era matters for some vitaquick models. For NuWave, the supplied listing specifies model 33101.
Match the Part Number When Possible
If your old ring or cooker manual lists a part number, use it as a key fit check. The products here identify replacements such as 998010441, FG-998010441R, M18804554, FAG-009, and 95X8083. A matching part number is more useful than choosing a gasket based only on brand or capacity.
Measure the Ring and Follow the Listing’s Method
Compare your old gasket’s inner and outer diameters with the product details when those measurements are available. Be careful about what a size describes: the XZW listing’s 28 cm size refers to the pot’s inner diameter, while the Fissler product describes a 26 cm cooker size. Use the cooker manual or seller’s measurement instructions if the ring and pot measurements are not clearly defined.
Check the Lid Groove and Gasket Shape
A gasket must sit flat and evenly in the sealing groove. Diameter is only one part of fit; the ring also needs to match the lid’s shape and sealing area. Do not force a ring that is too loose, too tight, twisted, folded, or lifting away from the groove. If the replacement does not seat correctly, stop and confirm the part rather than using the cooker under pressure.
Choose Between Original and Third-Party Parts
An original part, such as the Fissler gasket listed here, may be the right choice if you want the maker’s specified replacement. Third-party options can name precise compatible models or part numbers, but they are not made by the cooker brand. Read the compatibility details closely and follow your cooker manufacturer’s instructions for replacement parts.
Inspect the Old Ring and Install Safely
A gasket that is hardened, cracked, flattened, deformed, loose, or leaking may need replacement. Before removing it, make sure the cooker is completely cool and fully depressurized. Clean the lid groove, install the new ring evenly, and check around the full circle for twists or gaps. Follow the cooker manual’s instructions before using the appliance again.
Frequently Asked Questions
How do I know which pressure cooker gasket fits?
Check your cooker’s exact model, the gasket part number, and the ring’s measurements. Compare all three with the replacement listing when possible. Do not rely on capacity or brand alone.
Can I use a universal gasket if it has the same diameter?
Not necessarily. The ring also has to match the lid’s sealing groove and shape. A similar diameter does not confirm a safe or proper fit, so use the cooker manual and product compatibility details.
When should I replace a pressure cooker gasket?
Inspect the ring for cracks, hardening, flattening, deformation, looseness, or signs of leakage. The GJS Gourmet listing recommends replacement every 18 to 24 months or when deformation is noticed; follow your cooker manual as well.
Can I install a gasket while the pressure cooker is warm?
No. The product instructions for the Fagor replacements call for the cooker to be completely cool and depressurized before replacing the ring. Always make sure there is no pressure inside before opening or working on the lid.
Are the two Fagor gaskets in this list interchangeable?
No. The 998010441 gasket is listed for selected 8- and 10-quart Fagor cookers, while the M18804554 gasket is listed for selected 22 cm lids. Compare your cooker’s part number and measurements before choosing between them.
Is the GJS Gourmet gasket made by NuWave?
No. The listing says it is compatible with the NuWave Nutri-Pot 6Q model 33101, but it is not created or sold by NuWave.
Conclusion
The right pressure cooker gasket is the one that matches your exact lid—not simply the one with the closest-looking diameter. For selected Fagor cookers, compare the two Cutetool options by part number and size. Fissler owners should check the model and production-era limits for the original gasket, while NuWave Nutri-Pot 6Q model 33101 owners can consider the GJS Gourmet third-party option. The XZW two-pack is best approached as a size-based choice, with extra care to confirm that the ring fits the cooker’s lid groove. When in doubt, check your manual or contact the cooker maker before using a replacement under pressure.