An acoustically transparent projector screen lets you place your front speakers behind the picture instead of beside or below it. That can make a home theater easier to arrange and help keep dialogue and effects coming from the screen area. The right choice depends on your room, projector type, preferred screen size, and whether you want a fixed frame or a motorized screen that retracts when it is not in use.
Our picks include fixed-frame woven screens from Silver Ticket and Elite Screens, plus a motorized Elite Screens option. Check the stated throw compatibility before buying: some models are intended for standard or long-throw projectors, while ultra-short-throw setups can need a different screen design.
Quick Comparison
| Screen | Size | Design | Best for |
|---|---|---|---|
| Silver Ticket STR Series 110-Inch | 110-inch, 16:9 | Fixed frame; 1.15-gain woven surface | A larger fixed screen with flexible projector placement |
| Elite Screens Aeon AUHD 120-Inch | 120-inch, 16:9 | Edge-free fixed frame; 1.0-gain surface | A borderless look with standard or long-throw projectors |
| Elite Screens Aeon AUHD 135-Inch | 135-inch, 16:9 | Edge-free fixed frame; 1.0-gain surface | A large dedicated theater setup |
| Elite Screens Spectrum AcousticPro UHD 100-Inch | 100-inch, 16:9 | Motorized; retractable casing | A room where the screen needs to disappear between uses |
| Silver Ticket STR Series 100-Inch | 100-inch, 16:9 | Fixed frame; 1.15-gain woven surface | A smaller fixed screen for a more compact room |
Our Picks: Best Acoustic Projector Screens For In Wall Speakers reviews
Silver Ticket STR Series 110-Inch: A Flexible Fixed-Frame Pick
This 110-inch, 16:9 fixed-frame screen is designed to let sound pass through its woven surface, so you can position speakers behind the image. Its listed viewing area is 96 inches wide by 54 inches tall, while the full frame measures 102.3 by 60.3 inches. Measure the wall carefully and leave room for the frame before choosing this size.
The screen has a 1.15 gain and a stated 160-degree viewing angle. Its aluminum frame is wrapped in black velvet, which helps define the image edge and gives the screen a more finished look. A tensioning-rod system is used during assembly, and the mounting brackets allow horizontal adjustment after installation.
This is a strong option if you want a substantial fixed screen without moving up to the larger Elite Screens sizes. The supplied product information lists compatibility with long-, short-, and ultra-short-throw projectors, but it also warns that some UST projectors are not compatible with the STR frame. Confirm the projector and frame fit before ordering, especially for a UST setup.
Owners often describe the frame and fabric as solid for the category, though assembly still calls for patience. A reported concern is that fabric bonding at a rod pocket can loosen over time. That does not establish a common failure, but it is a reason to inspect the fabric during setup and keep an eye on it.
Pros:
- Acoustically transparent woven screen allows speakers to sit behind the image.
- 1.15 gain and a stated 160-degree viewing angle.
- Velvet-wrapped aluminum frame gives the screen a defined border.
- Horizontal adjustment in the mounting brackets can help with alignment.
Cons:
- The large frame needs careful wall and projector-image measurements.
- Some UST projectors may not work with this frame.
Verdict: Choose the 110-inch STR if you want a fixed, speaker-behind-the-screen setup and have verified that its frame fits your projector and room.
Elite Screens Aeon AUHD 120-Inch: A Borderless Fixed Screen
The 120-inch Aeon AUHD pairs an edge-free design with Elite Screens’ AcousticPro UHD surface. The viewing area is listed as 104.1 inches wide by 58.3 inches tall, and the overall frame measures 104.9 by 59.1 inches. With no traditional wide border around the picture, it can suit a theater where a minimal screen outline matters.
The 1.0-gain acoustic surface has a stated 180-degree viewing angle. Elite Screens describes its dense synthetic weave as moiré-free and gives a mean attenuation figure of -2.36 dB. The screen is specified for standard long-throw projectors; the product information does not recommend it for triple-laser short-throw projectors.
The split aluminum frame is intended to be lightweight and easier to assemble, and wall-mount brackets are included. However, fitting the screen fabric and aligning the edge-free finish may take care. Because an edge-free screen has little visual margin to hide alignment errors, take time to level the frame and tension the material evenly.
This model is a good middle ground between the Silver Ticket 110-inch and the Elite Screens 135-inch. Some owners report that installation and border alignment can be fiddly. Also, although the product description claims a moiré-free weave, compatibility can depend on the projector and setup, so check the manufacturer’s guidance for your specific projector.
Pros:
- Edge-free design gives the image a clean, modern outline.
- AcousticPro UHD surface is designed to pass sound from speakers behind it.
- 1.0 gain and a stated 180-degree viewing angle.
- Includes wall-mount brackets and a split aluminum frame.
Cons:
- Listed for standard long-throw projectors, not triple-laser short-throw setups.
- Fabric alignment and edge finishing can take extra care.
Verdict: Pick the 120-inch Aeon if you want an edge-free look and use a compatible standard or long-throw projector.
Elite Screens Aeon AUHD 135-Inch: A Big-Screen Theater Choice
This 135-inch Aeon AUHD uses the same AcousticPro UHD material and borderless style as the 120-inch model, but its larger image is aimed at a dedicated theater or a room with enough viewing distance. The listed viewing area is 117.7 inches wide by 66.2 inches tall. Its overall dimensions are listed as 118.6 by 67.1 inches, so plan for more wall space than the visible picture alone suggests.
The screen has a 1.0 gain and a stated 180-degree viewing angle. Its acoustic weave is designed to let sound pass from speakers behind the screen, and the manufacturer lists the material as suitable for standard long-throw UHD and HD projectors. The product information advises against using it with triple-laser short-throw projectors.
The edge-free design gives a large picture a clean appearance, but it also makes precise assembly and placement important. The split aluminum frame and included wall hardware support installation, although setting up a screen this wide is easier with another person. Check the projector’s image size and throw distance before committing to the 135-inch format.
Compared with the 120-inch Aeon, this model is best when the extra image area is useful rather than simply possible. The same setup considerations apply: fabric alignment may require patience, and claims about moiré performance should not replace checking compatibility with your projector.
Pros:
- Large 135-inch picture area for a dedicated viewing space.
- Acoustically transparent material supports speakers behind the screen.
- Edge-free design keeps the visible image outline minimal.
- 1.0 gain and a stated 180-degree viewing angle.
Cons:
- Needs substantial wall space and careful image-size planning.
- Not specified for triple-laser short-throw projectors.
Verdict: Choose the 135-inch Aeon when your room and projector can support its larger image and you want a borderless fixed screen.
Elite Screens Spectrum AcousticPro UHD 100-Inch: A Retractable Option
Unlike the fixed-frame models here, this 100-inch Spectrum screen rolls into a casing when you are done watching. Its 16:9 viewing area is listed as 87.2 inches wide by 49 inches tall, with overall dimensions of 100.2 by 61.9 inches. It can be mounted on a wall or ceiling, which gives you more placement options than a fixed frame.
The AcousticPro UHD surface has a 1.0 gain and a stated 180-degree viewing angle. It is designed to let sound pass from in-wall or behind-screen speakers, and the motorized system includes infrared and radio-frequency remotes, a wall-box controller, a programmable vertical drop position, and a 12-volt trigger feature. That trigger can synchronize screen movement with a projector’s power cycle.
This is the most convenient pick if you do not want a screen permanently visible on the wall. The trade-off is that a motorized unit has a casing and requires power and mounting planning, while a fixed-frame screen stays ready for use without having to lower it. The product information explicitly says this model is not compatible with ultra-short- or short-throw projectors.
Pros:
- Retracts when not in use, helping keep a room flexible.
- Includes IR and RF remotes plus a wall-box controller.
- 12-volt trigger can link screen movement to projector power.
- Wall or ceiling mounting is supported.
Cons:
- Not compatible with ultra-short- or short-throw projectors.
- The casing and motorized mounting need to be planned around the room.
Verdict: Choose the Spectrum if retracting the screen is important and your projector is not a short-throw or ultra-short-throw model.
Silver Ticket STR Series 100-Inch: A Compact Fixed-Frame Pick
The 100-inch Silver Ticket STR offers the same basic fixed-frame approach as the 110-inch option, in a more compact size. Its listed viewing area measures 87.125 inches wide by 49 inches tall, and the overall frame measures 93.425 by 55.3 inches. That smaller footprint can make it easier to fit in a room where a larger screen would overwhelm the wall.
The woven screen is acoustically transparent, with a 1.15 gain and a stated 160-degree viewing angle. Its 3⅛-inch aluminum frame is wrapped in black velvet, and the screen uses tensioning rods during assembly. The manufacturer lists compatibility with long-, short-, and ultra-short-throw projectors, while noting that some UST projectors may not fit the STR frame.
This version is a practical choice if you want a fixed screen with speakers behind it but do not need the larger image of the 110-inch model. The frame and material are designed for home theater use, though assembling and tensioning the screen still takes care. Measure the complete frame, not only the viewing area, and test your projected image size on the wall before installation.
Owners often appreciate the value and sturdy-feeling frame, while some report that assembly takes patience. There is also a reported concern about fabric bonding near a rod pocket loosening after extended use. Consider checking the screen material during assembly and keeping the mounting area accessible where possible.
Pros:
- Smaller 100-inch size is easier to accommodate than larger fixed screens.
- Acoustically transparent woven material allows speakers behind the image.
- 1.15 gain and a stated 160-degree viewing angle.
- Velvet-wrapped frame helps give the image a clear border.
Cons:
- Some UST projector and frame combinations may not be compatible.
- Assembly and fabric tensioning require careful setup.
Verdict: The 100-inch STR is a sensible fixed-frame choice for a smaller room, provided you confirm the frame works with your projector.
How to Choose an Acoustic Projector Screen for In-Wall Speakers
Confirm the Screen Is Acoustically Transparent
For speakers behind the picture, choose a screen specifically described as acoustically transparent. The woven or perforated surface lets sound pass through, but it can affect sound and image performance. Compare the screen material details, and plan to position and calibrate speakers after installation rather than assuming the screen will have no effect on audio.
Match the Screen to Your Projector’s Throw Type
Check whether your projector is standard throw, short throw, or ultra-short throw before choosing a screen. The Elite Screens Aeon AUHD models are specified for standard long-throw projectors and are not recommended for triple-laser short-throw use. The motorized Spectrum model is listed as incompatible with short- and ultra-short-throw projectors. Silver Ticket lists broader throw compatibility but warns that some UST projectors may not work with its STR frame.
Measure the Viewing Area and the Full Frame
Screen size refers to the diagonal of the viewing area, not the full space the product occupies. A fixed frame extends beyond the image, and a motorized model needs room for its casing. Measure your wall, seating distance, projector image, and speaker placement. If you are unsure about the image size, project the image onto the wall before installing the screen.
Choose Fixed or Motorized Construction
A fixed-frame screen stays stretched and ready for use, making it a natural fit for a dedicated theater room. It also needs a permanent place on the wall. A motorized screen can retract out of sight, which can suit shared spaces, but you will need to plan for its casing, mounting, controls, and power. Decide which trade-off fits how you use the room.
Compare Gain and Viewing Angle
Gain describes how much light the screen reflects relative to a reference, while viewing angle indicates how widely the picture can be viewed. The Silver Ticket options list 1.15 gain and a 160-degree viewing angle; the Elite Screens options list 1.0 gain and a 180-degree viewing angle. Treat these specifications as comparison points, not a guarantee of brightness or viewing quality in every room.
Plan Speaker Placement Behind the Screen
Make sure your front speakers fit behind the screen and align with the image. Check the width and height of the visible area, the frame depth, and the distance available for speakers. A screen that is too small may not cover the speakers, while a larger screen may require moving seats or changing projector placement. Keep access to equipment in mind when building a wall or mounting the screen.
Consider Setup and Maintenance
Fixed-frame screens need assembly and even fabric tension, while a motorized screen adds moving parts and controls. A larger frame is easier to handle with help, and careful leveling can prevent visible alignment problems. Check the manufacturer’s installation instructions and warranty terms, and inspect the material and frame during setup.
Frequently Asked Questions
Can I put in-wall speakers behind an acoustically transparent projector screen?
Yes. These screens are designed to let sound pass through their material, allowing speakers to sit behind the picture. Confirm the screen’s dimensions and placement so the speaker fronts are covered by the viewing area and positioned appropriately.
Will an acoustically transparent screen work with any projector?
No. Compatibility depends on the screen and projector type. In particular, check short-throw and ultra-short-throw restrictions before buying. The Elite Screens Aeon models are intended for standard long-throw projectors, while the Spectrum motorized model is listed as incompatible with short- and ultra-short-throw projectors.
Is a fixed-frame or motorized screen better?
Neither is best for every room. A fixed frame stays in place and is suited to a dedicated theater. A motorized screen can retract when you are not watching, but it requires room for the case and a suitable mounting and control setup.
What screen size should I choose?
Choose a size that fits your wall, seating distance, and projector’s image range. Measure the full screen or casing as well as the viewing area. Projecting an image on the wall before installation can help you judge whether the picture feels right in your room.
Does acoustic transparency affect sound?
A screen material can affect sound passing through it, so acoustic transparency does not mean there is no change at all. The Elite Screens AcousticPro UHD specification lists mean attenuation of -2.36 dB. Check the material information for the model you are considering and adjust speaker placement or audio settings if needed.
Are these screens suitable for a bright room?
The supplied specifications describe screen gain and viewing angle, but do not establish performance in every lighting condition. Room light, projector output, screen size, and surface finish all matter. If you can control the room lighting, compare the screen and projector as a complete setup rather than relying on gain alone.
Final Recommendation
For a fixed-frame screen with a larger image and a 1.15-gain woven surface, the Silver Ticket STR 110-inch is a strong all-around option when its frame fits your projector. Choose the Silver Ticket 100-inch if your room calls for a smaller fixed screen. For a borderless look, consider the Elite Screens Aeon AUHD in 120 or 135 inches, matching the size to your wall and viewing distance. If you need the screen to retract, the Elite Screens Spectrum offers motorized convenience, but only for compatible projector types.
