Finding the best inflatable mattress for the back seat of a truck starts with measuring: rear-seat width, available length, and the space behind the front seats can vary a lot by truck. The picks below include purpose-made back-seat air beds, a no-inflation alternative, and a standard twin air mattress that is better suited to a flat indoor or campsite surface. Check the product dimensions against your truck before you buy, and use any sleep setup only while the vehicle is parked.
Quick Comparison
| Product | Best for | Key details | Keep in mind |
|---|---|---|---|
| AYAMAYA Truck Air Mattress with Rechargeable Pump | All-in-one back-seat setup | 61 x 32 inches; built-in rechargeable pump, pillow, and support column | Confirm the dimensions and seat shape suit your truck |
| Intex Dura-Beam Deluxe Twin Air Mattress | Guests, tents, or a flat sleeping surface | Twin size; 18 inches tall; built-in AC pump | Not designed specifically for a truck back seat |
| Umbrauto Car Air Mattress Bed | A longer back-seat sleeping area | 69 x 29.5 x 6 inches; pump and pillow included | Measure carefully; the listed width is relatively narrow |
| YASHINE Non-Inflatable Truck Mattress | A simple, no-pump option | 59 x 36 x 2 inches; foldable and strap-mounted | Check seat shape and support before relying on it for sleeping |
| DikaSun Car Air Mattress | Travelers who want a 12-volt pump | Includes a car-power pump, two pillows, and carry bag | Product dimensions are not provided; verify fit before purchase |
Our Picks: Best Inflatable Mattress For Back Seat Of Truck reviews
1. AYAMAYA Truck Air Mattress: Best All-in-One Back-Seat Setup
The AYAMAYA is made specifically to turn a vehicle’s rear seat into a resting area. Its 61 x 32-inch surface includes a built-in pillow and a separate inflatable support column, so you do not have to assemble a bed from several unrelated pieces. The column is intended to help bridge the change in angle between the rear seat and the footwell.
A detachable rechargeable pump handles inflation and deflation without needing a cigarette-lighter socket. That can be handy when you are parked away from an outlet or want to set up without running a cord through the cab. The mattress is made from thickened PVC with a flocked top, and it packs into an included carry bag.
The one-piece design and quick setup make this a strong pick for road trips, camping stops, or occasional rest breaks. Some owners describe the setup and pack-away process as straightforward. However, a truck’s rear seat shape and footwell can affect how level the bed sits, so treat the listed dimensions as a starting point and measure your own cab. One owner also reported that the mattress softened over time, which is a reason to check its firmness before settling in for a long rest.
Pros:
- Rechargeable pump works without a vehicle power outlet
- Built-in pillow and support column simplify setup
- Includes a carry bag and repair patch
- Listed weight capacity is up to 660 pounds
Cons:
- Its 61 x 32-inch size may not fit every truck cab or seat layout
- As with other inflatable beds, check for pressure loss during use
Verdict: Choose the AYAMAYA if you want a truck-focused inflatable bed with a rechargeable pump and integrated support, provided its dimensions match your rear seat.
2. Intex Dura-Beam Deluxe Twin: Best for a Flat Surface Near Your Truck
The Intex Dura-Beam is a standard 18-inch-tall twin air mattress, not a truck back-seat mattress. Its raised profile and twin shape are generally better suited to a tent, guest room, or other flat sleeping area than to the confined and uneven space inside a pickup cab.
Its dual-layer air-pocket surface, flocked top, and Fiber-Tech construction are designed to provide a more bed-like feel than a low-profile vehicle pad. The built-in electric pump inflates and deflates the mattress, but it requires a 110–120-volt AC outlet. That means it is not a direct plug-in solution for a truck’s 12-volt socket unless you have a compatible power source.
The maker notes that the material can stretch during the first few uses, which may feel like pressure loss; the supplied instructions say to reinflate as needed while the mattress settles. This is a useful option for camping or a guest space when you have room and AC power. For sleeping in the back seat itself, its height and standard twin design are major drawbacks compared with the purpose-made car beds in this list.
Pros:
- Raised 18-inch height gives it a more traditional bed feel
- Built-in AC pump handles inflation and deflation
- Flocked surface and carry bag are included
- Designed with supportive internal beams and reinforced edges
Cons:
- Not designed specifically for a truck back seat
- Built-in pump requires a 110–120-volt AC outlet
Verdict: Consider the Intex for a tent or flat surface near your truck, but choose a back-seat-specific model if you plan to sleep inside the cab.
3. Umbrauto Car Air Mattress: Best for a Longer Sleeping Surface
The Umbrauto is a back-seat-style inflatable bed with listed dimensions of 69 x 29.5 x 6 inches. Its extra length may suit taller sleepers or cabs with enough room behind the front seats, while its 6-inch thickness keeps it lower than a standard bedroom air mattress. The wave-shaped surface is intended to offer support, and the flocked PVC construction has a soft top.
A pump, pillow, carry bag, nozzle, and repair patch are listed as included. The mattress is also described as having a capacity of up to 600 pounds. Unlike the AYAMAYA, its product details do not specify a built-in rechargeable pump, so check the pump type and power requirements on the current product listing before purchasing.
The length is useful only if your truck has enough clear space, and the listed width is narrower than the AYAMAYA’s. That makes measuring especially important if two people will share it. The product is described for car and SUV back seats as well as other uses, but a broad fit claim is not a substitute for checking your particular cab dimensions.
Pros:
- Long 69-inch sleeping surface
- Includes a pump, pillow, carry bag, and repair patch
- Flocked PVC surface is designed for a softer feel
- Listed capacity is up to 600 pounds
Cons:
- At 29.5 inches wide, it may feel narrow for two sleepers
- Pump power details are not specified in the supplied product information
Verdict: The Umbrauto is worth considering when you need extra length, but confirm both the cab fit and pump setup before choosing it.
4. YASHINE Non-Inflatable Truck Mattress: Best for Setup Without a Pump
Despite the air-mattress wording in its product title, the YASHINE is a non-inflatable, foldable mattress. It measures 59 x 36 x 2 inches and is designed to spread across a large truck’s rear seat. To install it, unfold the pad, fasten its buckle, and attach the strap to a headrest post. There is no air pump and no inflation step.
This design can be appealing if you want to avoid air leaks or carrying a pump. Its 2-inch thickness is much lower than an air bed, so it is easier to fold and store in a seat back or trunk. The listed fit examples include several medium and large truck models, but the product information also recommends measuring your rear seat before purchase. Truck trims and seat shapes can differ, so do not assume a listed vehicle name guarantees a perfect fit.
The lower profile and lack of adjustable air pressure mean it may not feel as cushioned as a thicker inflatable mattress. It is best viewed as a simple, foldable pad for adding a resting surface rather than a plush bed. The product also describes use with pets and children, but follow vehicle and seat-belt safety guidance whenever the truck is moving.
Pros:
- No inflation, pump, or air-leak concerns
- Folds for storage when not in use
- Strap-and-buckle setup is straightforward
- Listed dimensions are 59 x 36 inches
Cons:
- At 2 inches thick, it is less cushioned than an air mattress
- Fit depends on rear-seat dimensions and shape
Verdict: Choose the YASHINE if you prefer a foldable, no-pump pad and your truck’s rear seat matches its dimensions.
5. DikaSun Car Air Mattress: Best for a 12-Volt Car-Power Pump
The DikaSun is an inflatable back-seat bed that comes with a pump designed to connect to a car power socket. It also includes two pillows, two support pieces, and a carry bag. The product information lists thick flocked fabric over PVC and describes the mattress as suitable for cars, SUVs, and trucks.
The 12-volt pump is a practical feature if you want to inflate the bed from the vehicle rather than rely on a rechargeable pump or AC outlet. The product is listed with a capacity of up to 600 pounds, but the supplied details do not give mattress dimensions. That is a key gap for truck owners: confirm the exact size and compare it with your seat and footwell before ordering.
The included pillows and supports may help create a more complete setup, but they also mean there are more separate pieces to keep track of than with the one-piece AYAMAYA design. The product is described for two to three people, but actual comfort depends on the available surface area, so use the missing measurements as a reason to be cautious about planning for multiple sleepers.
Pros:
- Includes a 12-volt car-power pump
- Comes with two pillows, two support pieces, and a carry bag
- Flocked PVC surface is described as waterproof and easy to clean
- Listed capacity is up to 600 pounds
Cons:
- Product dimensions are not provided in the supplied details
- Multiple included pieces may take more time to position and store
Verdict: The DikaSun could suit you if you want a 12-volt pump and included pillows, but verify its dimensions and fit before buying.
How to Choose a Mattress for Your Truck’s Back Seat
Measure the full sleeping area
Measure the usable width across the rear seat and the length from the seat back to the front-seat backs or footwell area. Also note raised seat edges, seat-belt buckles, and any change in height between the seat and footwell. Compare those measurements with the mattress’s listed size, leaving room for the bed to sit without being forced against interior panels.
Check how the mattress handles the footwell gap
Many truck back seats do not form a flat rectangle when the front seats are in place. A support column or separate support piece can help fill the gap, while a simple pad may rely on the seat itself for support. Look closely at what is included and consider whether the design can sit level in your specific cab.
Choose a pump that suits your power options
A rechargeable pump avoids the need for a socket, while a 12-volt pump can use a vehicle power outlet. A built-in AC pump, like the one on the Intex, needs a 110–120-volt outlet and is less convenient for direct use in a truck. Check whether the pump is built in or separate, and confirm its power source before you buy.
Think about thickness and comfort
A thicker inflatable bed can provide more cushioning, but it may take up more of the cab and can be harder to fit around seat contours. A lower-profile pad is easier to fold and store but may feel firmer. Flocked tops can provide a softer surface, while internal beams or support columns are intended to help with stability. Your preferred firmness and the truck’s seat shape both matter.
Match the size to the number of sleepers
Capacity claims describe a weight limit, not how spacious the mattress will feel. Check the actual width and length if two people will share it. A bed that works for one person may feel cramped for two, even if its stated weight capacity is high. When dimensions are missing, confirm them with the seller before you rely on the mattress for a trip.
Consider storage and setup time
If you plan to use the mattress often, consider how quickly it inflates and deflates, whether the pump stays attached, and how small it packs. A one-piece design can be simpler to manage, while a setup with separate pillows and supports may take more arranging. A foldable non-inflatable option avoids pump setup but may take up more storage space than a deflated air bed.
Plan for care and pressure checks
Inflatable beds can lose firmness if they have a leak or if their material settles after initial use. Follow the included instructions, check the mattress before sleeping, and bring a repair patch when one is supplied. Keep sharp objects away from the sleeping surface, and do not assume that a product described as leak-resistant cannot develop a leak.
FAQs
Can I use a regular twin air mattress in a truck back seat?
You can compare its dimensions with the available space, but a standard twin mattress may be too tall or awkward for a truck cab. The Intex model in this list is 18 inches high and uses an AC pump, so it is better suited to a flat surface with access to an outlet than to a typical rear seat.
How do I know whether a mattress will fit my truck?
Measure the rear-seat width and the usable length, including any gap behind the front seats. Compare those figures with the product dimensions and check how the mattress is supported. If the product listing does not give dimensions, ask for them before purchasing.
Is a rechargeable pump better than a 12-volt pump?
Neither is right for every situation. A rechargeable pump does not need a vehicle socket, while a 12-volt pump can draw power from a compatible car outlet. Choose based on your access to power and check how the pump is charged or connected.
Do these mattresses work for two people?
Some models list weight capacities suitable for two sleepers, but capacity does not guarantee enough room. Check the mattress width and length, then consider the size of your truck’s back seat. A narrow sleeping surface may be uncomfortable to share.
What is the difference between an inflatable mattress and the YASHINE option?
The YASHINE is a foldable, non-inflatable pad, so it does not need a pump and cannot lose air. It is only 2 inches thick, however, while inflatable models offer more height and may provide a softer surface.
Can I sleep on a truck mattress while the vehicle is moving?
No. These products are intended as sleeping or resting surfaces, not as passenger seats. Use them only when the vehicle is parked, and follow the truck’s seat-belt and passenger-safety requirements while driving.
Final Recommendation
For a purpose-made inflatable setup, the AYAMAYA is the most complete option here: it combines a rechargeable pump, built-in pillow, and support column in one design. The Umbrauto is worth considering if its longer dimensions suit your cab, while the DikaSun offers a 12-volt pump but requires extra care because dimensions are not listed in the supplied product details. If you prefer to avoid inflation altogether, consider the foldable YASHINE. In every case, measure your truck’s rear-seat area first; fit is more important than a broad vehicle-compatibility claim.
