If you back up a truck, trailer, or RV in dim light, a wireless camera with night vision can make it easier to spot what is behind you. The right choice depends on more than night visibility: consider how the camera gets power, how it mounts, whether it needs a separate monitor, and how far its signal must travel. Here are five options with different setups, from a magnetic battery-powered system to a camera designed to pair with a compatible Garmin navigator.
Quick Comparison
| Product | Night Vision | Power and Mounting | Best For |
|---|---|---|---|
| Befumly 1296P Magnetic Wireless Camera | Automatic infrared; stated visibility up to 10 m | Rechargeable battery, solar assist, magnetic mount | Truck owners who want a high-resolution, removable setup |
| LeeKooLuu 1080P Wireless Backup Camera | Automatic night vision | Camera connects to a power source; monitor connects to vehicle power | Drivers who want a dedicated 7-inch monitor and adjustable parking lines |
| eRapta Dual Magnetic Wireless Camera System | HD night vision | Rechargeable batteries, magnetic mounts | Trailer and RV owners who want two cameras and recording support |
| Garmin BC 50 with Night Vision | NightGlo illumination up to 20 feet | Switched 12-volt power; pairs with a compatible Garmin navigator | Drivers who already use a compatible Garmin device |
| HEECOOMI Solar Magnetic Backup Camera | Automatic infrared night vision | Rechargeable battery, solar assist, magnetic mount | RV and trailer owners who want flexible camera positioning |
Our Picks: Best Wireless Backup Cameras With Night Vision reviews
1. Befumly 1296P Magnetic Camera for a High-Resolution View
The Befumly system stands out for its stated 1296P camera resolution and 7.2-inch monitor. Its magnetic camera is designed to attach to a suitable flat steel surface, so you can avoid drilling and running a video cable from the rear of the vehicle to the cab. The monitor still needs to be set up in the cab, and the camera needs charging or suitable daylight to help replenish its battery.
For after-dark use, the camera has automatic infrared night vision with 11 IR LEDs and a stated visibility distance of up to 10 meters. The listed HDR and 3D noise-reduction features are intended to help manage glare and grain in the image. Its built-in 15,800mAh battery is rated for up to 32 hours between charges, while the 5W solar panel provides auxiliary charging in suitable daylight. USB-C charging is listed at about eight hours.
This is a practical fit for truck owners who want a removable camera and do not want to wire it to the vehicle’s reverse lights. The magnetic mount is only useful where the vehicle has a suitable steel surface; it will not attach directly to every trailer or body panel. The claimed magnetic hold and operating time are manufacturer specifications, so placement, conditions, and actual use may affect results.
Pros:
- Higher stated resolution than the 1080P systems in this list
- Automatic infrared night vision with a stated range up to 10 meters
- Magnetic mounting avoids drilling and a rear-to-cab video cable
- Large rechargeable battery with solar-assisted charging
Cons:
- Requires a suitable flat steel mounting surface
- The camera is battery-powered, so charging and daylight conditions matter
Verdict: Choose the Befumly if resolution, a large monitor, and a removable magnetic camera matter more to you than a hardwired installation.
2. LeeKooLuu 1080P System with a 7-Inch Monitor
This LeeKooLuu setup combines a 1080P camera with a 7-inch monitor. The system is described as pre-paired, which can simplify setup. The monitor connects to vehicle power, while the camera needs its own power connection; listed options include reverse lights, running lights, or another power source. “Wireless” here refers to the camera-to-monitor connection, not a completely power-free installation.
The camera provides automatic night vision and a 150-degree viewing angle. The monitor also has adjustable parking lines, which can be set to better match your vehicle, and supports split-screen viewing with up to two cameras. Those features may be helpful if you want to add a second view, but the included setup details should be checked before assuming an extra camera is part of the package.
Its IP69 waterproof rating is a useful specification for a camera exposed to road spray and weather. Compared with the magnetic battery-powered options, this system involves connecting the camera to a power source. That can be a better fit for a more permanent installation, but it is less convenient if you want to move the camera between vehicles or trailers.
Pros:
- 7-inch monitor with a stated 1080P camera feed
- Automatic night vision and 150-degree viewing angle
- Adjustable parking lines and support for up to two cameras
- IP69 waterproof rating
Cons:
- The camera and monitor both need power connections
- Not as quick to move between vehicles as a battery-powered magnetic system
Verdict: The LeeKooLuu is a sensible choice if you want a dedicated monitor, adjustable guidelines, and a camera powered by the vehicle rather than a rechargeable camera battery.
3. eRapta Dual Magnetic System for Trailer Coverage
The eRapta system includes two magnetic cameras and a 7-inch DVR monitor. Its magnetic bases are intended for ferromagnetic metal surfaces, and the monitor plugs into the vehicle’s power supply. That makes it useful for tasks such as checking a trailer while backing up or keeping more than one rear area in view.
The system supports up to four cameras, with split-screen display options and loop recording when you add an SD card, which is not included. Its listed wireless range is up to 328 feet in open space and 40 feet between vehicles. Those figures are stated ranges, not a guarantee of the same connection in every setup; vehicle structure and distance can affect wireless transmission.
The cameras provide HD1080P video and night vision, with a 150-degree viewing angle. Each camera has a 9,600mAh rechargeable battery, with up to 12 hours of continuous use stated by the manufacturer. The cameras also have an IP69K rating and are listed for operation between -6°F and 151°F. The trade-off is that you need to manage camera charging and supply your own compatible SD card if you want recording.
Pros:
- Two magnetic cameras are included
- Supports up to four camera views and split-screen display
- Loop recording is available with a separately supplied SD card
- Rechargeable camera batteries and IP69K-rated construction
Cons:
- SD card for recording is not included
- Camera runtime is limited by battery charge and use
Verdict: Pick the eRapta if you need two camera positions for a trailer or RV and value multi-camera viewing and optional recording.
4. Garmin BC 50 for Drivers with a Compatible Navigator
The Garmin BC 50 is a camera, not a stand-alone camera-and-monitor kit. It wirelessly pairs with a compatible Garmin navigator, so check device compatibility before buying. The camera provides 720p HD video and a 160-degree field of view. Garmin’s NightGlo feature is specified to illuminate up to 20 feet behind the vehicle.
Its 50-foot transmission range is intended to suit longer vehicles, including RVs and trailers. An optional 50-foot extension cable, sold separately, can extend the stated range up to 100 feet for longer vehicle and trailer configurations. The camera has an IPX7 weather-resistance rating, but it requires a switched 12-volt power connection, such as a connection to the reverse lights. Garmin recommends professional installation.
This design may be a clean choice if you already use a compatible Garmin navigator and want the camera feed on that device. It is less convenient if you need a complete system with a separate monitor or want a removable, battery-powered camera. Its stated night-illumination distance is also shorter than the listed infrared range of some other options, so consider your actual vehicle layout and reversing needs.
Pros:
- 160-degree field of view
- NightGlo illumination specified up to 20 feet
- 50-foot wireless range, with an optional extension cable available
- IPX7 weather-resistant design
Cons:
- Requires a compatible Garmin navigator, which is not included as a monitor
- Needs a switched 12-volt connection; professional installation is recommended
Verdict: The Garmin BC 50 is best suited to drivers who already have a compatible Garmin navigator and are comfortable with a powered installation.
5. HEECOOMI Solar Camera with Flexible Positioning
HEECOOMI pairs a magnetic solar-assisted camera with a 7-inch 1080P IPS touchscreen monitor. The camera can rotate 360 degrees horizontally and tilt 180 degrees vertically, making it easier to adjust the view for different mounting positions. Its lens is listed with a 140-degree viewing angle, and the monitor supports up to four cameras.
The camera has automatic infrared night vision and an IP69K rating. Its 10,000mAh battery and solar panel provide the power setup, with an auto-sleep mode described as a way to reduce standby drain when the monitor is off. The product information does not give a specific runtime or solar recharge time, so plan on checking battery needs for your own routine rather than assuming the solar panel will keep it charged in all conditions.
The magnetic base is designed for metal surfaces. If you want to mount it on a non-metal surface, the product information says an extra metal mounting plate may be available by contacting the seller. The monitor also supports loop recording and playback with a microSD card. This gives the HEECOOMI more positioning flexibility and recording features than the simpler magnetic systems, but its fit depends on mounting surface and whether you need to purchase a card separately.
Pros:
- Camera rotates and tilts for flexible aiming
- 7-inch 1080P touchscreen with support for up to four cameras
- Automatic infrared night vision and IP69K rating
- Solar-assisted power, auto-sleep mode, and DVR support
Cons:
- Magnetic mounting requires a metal surface or an additional mounting plate
- No specific battery runtime or solar charging time is provided
Verdict: Choose the HEECOOMI if you want a flexible camera angle, touchscreen controls, and multi-camera support in a magnetic solar-assisted system.
How to Choose a Wireless Backup Camera with Night Vision
Decide how the camera will get power
Wireless describes how the camera sends its image to the screen; it does not always mean the camera runs without wires or charging. Battery-powered models such as the Befumly, eRapta, and HEECOOMI avoid a camera power cable during use, but you will need to manage charging. Solar panels can assist in suitable daylight, but they should not be treated as a guaranteed power source. The LeeKooLuu and Garmin require vehicle power connections, which can suit a more permanent installation.
Check night vision details, not just the label
Night vision varies by model. Compare the stated illumination method and range where provided: the Befumly lists automatic infrared visibility up to 10 meters, while Garmin specifies NightGlo illumination up to 20 feet. Other models describe automatic or HD night vision without giving a distance in the supplied product details. The final image also depends on the camera’s position and the conditions around your vehicle, so treat night-vision specifications as guidance rather than a promise of visibility in every setting.
Match the monitor and camera system to your vehicle
Most options here include a separate monitor, but the Garmin BC 50 relies on a compatible Garmin navigator. Consider where you can place the screen and whether its size and controls suit your cab. If you need more than one view, check the number of supported cameras and which cameras are included. The eRapta includes two cameras and supports up to four; the LeeKooLuu supports up to two, and the HEECOOMI supports up to four.
Measure wireless distance and vehicle layout
A pickup, long RV, and truck-and-trailer combination place different demands on a wireless signal. Compare the stated range with the distance from the camera to the monitor, but remember that a listed open-space range may not reflect a real vehicle setup. The eRapta provides separate figures for open space and between vehicles, while Garmin lists a 50-foot range and an optional extension cable for longer configurations.
Confirm the mounting surface
Magnetic cameras are convenient when you have a suitable steel surface and want to reposition or remove the camera. They may not attach to aluminum, fiberglass, or other non-ferromagnetic surfaces. The HEECOOMI product information mentions an additional metal plate for non-metal surfaces; check its availability and suitability before relying on it. Hardwired models avoid this particular limitation but require a secure installation location and power connection.
Consider weather protection and recording needs
Look at the listed water-resistance rating if the camera will face rain, road spray, or frequent washing. The products here include ratings such as IP69, IP69K, and IPX7, which are different specifications and should not be treated as identical. If you want video recording, check whether the system supports loop recording and whether a memory card is included. The eRapta requires a separately supplied SD card, and the HEECOOMI supports recording with a microSD card.
Frequently Asked Questions
Do wireless backup cameras need any wiring?
Not always for video transmission, but they still need power. Battery-powered cameras may avoid a vehicle power cable at the camera, while models such as the LeeKooLuu and Garmin require a power connection. Check both the camera and monitor power requirements before you buy.
Can I use a magnetic camera on any trailer?
No. A magnetic base needs a suitable ferromagnetic metal surface. It may not attach directly to aluminum or fiberglass. Check your trailer’s construction and mounting area, and confirm whether an extra mounting plate is available if needed.
Which system includes two cameras?
The eRapta system listing specifies two included cameras and support for up to four. Other products in this selection support additional cameras, but do not assume that extra cameras are included unless the package details say so.
Does solar charging mean I never need to recharge the camera?
No. Solar is described as auxiliary power on the Befumly and HEECOOMI systems. How much it helps depends on daylight and use, so check the battery and charging information and be prepared to recharge when needed.
Will the Garmin BC 50 work with any screen?
The supplied product information says it pairs with a compatible Garmin navigator. It is not described as a stand-alone camera-and-monitor kit, so confirm that your navigator is compatible before choosing it.
Do I need a memory card for recording?
A memory card is needed for the listed loop-recording functions. The eRapta description states that its SD card is not included. The HEECOOMI supports recording with a microSD card; check the package details for whether one is supplied.
Final Recommendation
For a removable, battery-powered camera with higher stated resolution, the Befumly is the strongest fit in this group, provided you have a suitable steel mounting surface. Choose the eRapta if two included cameras and recording support are priorities. The LeeKooLuu offers a vehicle-powered setup with a dedicated monitor, while the HEECOOMI adds flexible camera positioning and touchscreen controls. If you already own a compatible Garmin navigator and want a powered installation, the BC 50 is the most natural match. Before ordering, confirm mounting, power, monitor compatibility, and camera count for your vehicle.