Your Modern LivingPractical guides for everyday living

Buying Guide

Best Running Boards For Ford F150: Wide Step Picks Compared

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Guide at a glance

  • 5products compared
  • 9minute read
  • Side-by-side comparison table
  • Who each pick suits best
  • What to check before you buy

Choosing the best running boards for your Ford F-150 starts with confirming your cab style: several options here are made for SuperCrew models with four full-size doors, not every F-150 configuration. From wide, traditional step boards to drop-style side bars, these picks offer different balances of footing, clearance, materials, and appearance. Check the product listing’s fitment details against your exact truck before ordering.

Quick Comparison

ProductStyleStandout featureBest for
Perfit Liner 6-Inch Running BoardsWide step boardsAnti-slip surface; stated capacity of 500 pounds per sideEveryday entry and exit
Tyger Auto LanderX Running BoardsTriangular tube side barsFive-inch drop and bolt-on designLifted trucks and a more rugged look
COMNOVA 6-Inch Running BoardsWide, OE-style boardsSliding adjustment for positioningCustomizing step placement
AutoBull 6-Inch Side StepsWide aluminum step boardsHoneycomb anti-slip center and ABS corner coversWide footing with a modern look
VEVOR 6-Inch Step BarsWide stainless-steel boardsNon-slip surface and stated 500-pound capacityA sturdy, easy-to-clean step surface

Our Picks: Best Running Boards For Ford F150 reviews

Perfit Liner: Wide Boards for a Confident Step

These Perfit Liner boards are a straightforward choice if you want a broad step along the side of your truck. The six-inch width gives you more room to place your foot than a narrow tubular bar, while the anti-slip design is intended to help with footing in wet or slippery conditions.

The manufacturer states that each side can support up to 500 pounds. The set includes both boards, mounting brackets, hardware, and instructions. The listed fitment is for SuperCrew F-150 models with four full-size doors, so confirm your cab before buying.

Compared with the Tyger LanderX, this set has a more traditional, flat step-board profile. That may suit everyday use better if you want a broad platform rather than a drop-style bar. The trade-off is that the listing provides less detail about the board material and finish than some competing options.

Pros:

  • Six-inch-wide stepping surface
  • Anti-slip design for added footing
  • Stated 500-pound capacity per side
  • Includes brackets, hardware, and instructions

Cons:

  • Fitment is limited to specified crew cab configurations
  • Material and finish details are limited in the supplied description

Verdict: Choose the Perfit Liner if you want a wide, conventional step board and its cab-specific fitment matches your F-150.

Tyger Auto LanderX: Drop-Style Bars for Taller Trucks

The LanderX takes a different approach from a flat running board. Its triangular carbon-steel tube design sits with a five-inch drop, giving passengers a lower step point than a bar mounted close to the rocker panel. Tyger describes it as a good option for lifted trucks and SUVs.

The bars have a textured black, dual-stage E-coating and powder finish intended to resist rust and corrosion. The listing states a 500-pound weight capacity and about 12 inches of ground clearance. It includes both sides, brackets, and mounting hardware, with a bolt-on installation described as taking about 20 minutes. Actual installation time can vary.

Its tube shape has a more rugged appearance than the wide, flat Perfit Liner or COMNOVA boards. Keep in mind that the step area is not described as a six-inch-wide platform, so it may not be the best pick if you want the broadest place to stand. Confirm your cab configuration carefully; the listing excludes SuperCab models.

Pros:

  • Five-inch drop can make entry easier on a taller truck
  • Triangular carbon-steel tube design
  • Textured coating is designed to help resist corrosion
  • Includes bolt-on hardware and a stated three-year manufacturing-defect warranty for US customers

Cons:

  • Not compatible with SuperCab configurations
  • Tube-style step may offer less foot space than a wide, flat board

Verdict: The LanderX is a strong fit if you want a lower drop step and a distinctive tube-bar look, especially on a lifted truck.

COMNOVA: Adjustable, OE-Style Step Boards

COMNOVA’s boards pair a six-inch step area with a more factory-style appearance. The listing describes a textured black-coated steel construction, aluminum boards with polymer stripes, and slip-resistant plastic step pads. That mix gives the set a more finished look than a basic tube bar.

A notable feature is the sliding design, which lets you adjust the boards forward or backward during installation. This can help you position the step area to suit your truck and how you use it. The listed installation uses included hardware and does not require drilling or cutting.

These boards stand out from the Perfit Liner through their stated adjustment feature and more detailed description of the step-pad design. The supplied information does not give a weight capacity, so shoppers who need a specific load rating should compare that point with other options. As with the other listings, confirm that your truck has the required crew cab and four full-size doors.

Pros:

  • Six-inch-wide step area
  • Sliding design allows forward-and-back positioning
  • Slip-resistant plastic step pads
  • Listing describes bolt-on installation without drilling or cutting

Cons:

  • No weight capacity is stated in the supplied description
  • Fitment is limited to the specified crew cab configuration

Verdict: Pick the COMNOVA boards if adjustable placement and an OE-style look matter more to you than having a published load rating.

AutoBull: Aluminum Boards with a Grippy Center

AutoBull’s side steps combine a six-inch-wide platform with a honeycomb anti-slip center. The boards are made from rust-resistant aluminum, with ABS plastic corner covers and a black powder-coated finish. The wide step can be useful if you want more room for a foot than a narrow tubular bar provides.

The product description also highlights protection from scratches, dings, and road debris. It includes both sides, mounting brackets, and screws, and the listing states a 36-month warranty. The stated fitment is for specific crew cab and SuperCrew configurations, so use the listing’s cab information to verify your truck before ordering.

Compared with the VEVOR boards, AutoBull uses aluminum rather than stainless steel and adds ABS corner covers. The supplied data does not state a load capacity or provide installation details beyond the included mounting parts, so those may be important comparison points if you are deciding between the two.

Pros:

  • Six-inch-wide step surface
  • Honeycomb anti-slip center
  • Aluminum construction with ABS corner covers
  • Includes mounting parts and a stated 36-month warranty

Cons:

  • No weight capacity is stated in the supplied description
  • Fitment depends on matching the truck’s cab configuration

Verdict: Consider the AutoBull if you want a wide aluminum step with a honeycomb center and its fitment and warranty details meet your needs.

VEVOR: Stainless-Steel Boards with a Non-Slip Surface

VEVOR’s boards are made from 201 stainless steel and have a six-inch-wide step surface. Their textured, non-slip area is designed to improve footing, while the listing describes the surface as UV-resistant. The mirror-like finish is intended to be easy to clean, which may appeal if you prefer a brighter look to a textured black finish.

The manufacturer states that the boards can support up to 500 pounds and describes them as resistant to corrosion and harsh weather. The set is designed for bolt-on installation without drilling and includes gloves. The supplied fitment covers specific crew cab models, so check the product page against your truck’s exact details.

Compared with the AutoBull option, VEVOR specifies a load capacity and uses stainless steel, while AutoBull describes aluminum construction and ABS corner covers. The VEVOR finish may need more frequent wiping to keep its polished appearance looking clean, particularly if you prefer a consistently bright surface.

Pros:

  • Six-inch-wide step area with a non-slip texture
  • Stainless-steel construction
  • Stated 500-pound load capacity
  • Listing describes bolt-on installation without drilling

Cons:

  • Fitment is limited to the specified crew cab models
  • Polished finish may show dirt more readily than a textured black finish

Verdict: Choose VEVOR if you want a wide stainless-steel board with a stated load capacity and a polished appearance.

How to Choose Running Boards for Your Ford F-150

Confirm your cab and vehicle fitment

Fitment is the first thing to check, because a board made for one cab style may not fit another. Several products in this guide specify SuperCrew or crew cab models with four full-size doors and exclude other configurations. Compare your truck’s cab and model details with the Amazon listing before you order, and use any fitment tool provided there.

Choose a step shape that suits your truck

Flat running boards give you a broader platform, which can make it easier to place your foot. Tube-style bars have a narrower, more rugged profile; a drop-style design can put the step lower, a useful feature to consider on a taller or lifted truck. Think about who will use the truck and how much step area they prefer.

Compare the stepping surface

Look for a surface that matches your needs in wet or messy conditions. The products here describe anti-slip or textured areas in different forms, including plastic pads, a honeycomb center, and a textured step surface. A wider board can give you more room to place your foot, but the pattern and material also affect the look and upkeep.

Consider materials and finish

These options use different combinations of steel, aluminum, and stainless steel, with finishes that range from textured black coatings to a polished surface. Compare the material and finish details in the listing, especially if your truck regularly sees rain, snow, road salt, or dirt. No finish eliminates the need to keep the boards clean and inspect them over time.

Check load capacity and warranty details

Some listings provide a stated weight capacity, while others do not include one in the supplied product details. If load capacity is a priority, compare the exact claim for the pair or each side and avoid assuming the ratings are stated on the same basis. Warranty terms also vary, so read the listing for the coverage period and what it applies to.

Review installation requirements

Most of these options include mounting brackets and hardware, and some are described as bolt-on installations that do not require drilling. Still, installation details differ, and the time needed can depend on your tools and experience. Check what is included, read the instructions before starting, and make sure you can safely support the boards while attaching them.

Frequently Asked Questions

Do these running boards fit every Ford F-150 cab?

No. The products listed have specific cab requirements, and several are intended for SuperCrew models with four full-size doors. Check the exact listing against your truck’s cab configuration before buying.

Are running boards and nerf bars the same thing?

The terms are often used for side-mounted steps, but the designs can differ. A running board is usually a broader, flatter platform, while a nerf bar or tube step often has a narrower tubular shape. Check the product images and measurements to see what you are getting.

Which option has the widest step?

The Perfit Liner, COMNOVA, AutoBull, and VEVOR products are described as six inches wide. The Tyger LanderX uses a triangular tube design, and its listing highlights a drop rather than a wide platform.

Which option is designed for a lifted truck?

Tyger describes the LanderX as a good option for lifted trucks and highlights its five-inch drop. Check the step height and ground clearance in the listing to decide whether it suits your truck.

Do these running boards require drilling?

Installation details vary by product. The COMNOVA listing says no drilling or cutting is required, and the Tyger and VEVOR descriptions describe bolt-on installation. Check the instructions and listing for your chosen set before starting.

Can running boards help protect the truck’s sides?

Some running boards can help shield the lower body from minor contact and road debris, and the AutoBull listing specifically describes that kind of protection. They should not be treated as a substitute for dedicated body armor or as a guarantee against damage.

Final Recommendation

For a broad, traditional step, the Perfit Liner is a well-rounded option with a stated capacity per side and an anti-slip design. If your truck is lifted and you prefer a lower drop-style step, consider the Tyger LanderX. For adjustable placement, the COMNOVA stands out; for material-specific priorities, compare AutoBull’s aluminum construction with VEVOR’s stainless steel. Before choosing any set, verify cab fitment and review the full installation and warranty details in the product listing.

Author

  • Emily

    Emily is the editor of YourModernLiving, where she helps readers make informed decisions about home, kitchen, family, and everyday products. She focuses on researching product features, comparing available options, and creating practical buying guides to help readers find products that suit their needs, preferences, and budgets.

Leave a Comment