A hitch cargo carrier with a ramp can make it easier to load a scooter, wheelchair, mower, or other heavy gear without lifting it onto a platform. The right choice depends on more than the ramp: check the carrier’s dimensions and weight limit, make sure your vehicle and hitch can handle the full loaded weight, and consider how the ramp folds when you are not using it. Here are five options with different platform sizes, materials, and capacity claims.
Quick Comparison
| Carrier | Platform size | Listed capacity | Notable feature |
|---|---|---|---|
| CURT 18112 Aluminum Carrier | 50 × 30.5 in. | Not specified | Folding ramp and folding shank |
| ECOTRIC Carrier With Ramp | 46.2 × 26.8 in. | 500 lb | Steel construction and three ramp positions |
| 50 × 30-Inch Aluminum Carrier | 50 × 30 in. | 800 lb | 10-inch sides and a folding ramp |
| KQZZIV Foldable Carrier | 50 × 29 in. | 800 lb | Fold-up design and red reflectors |
| ERGOMASTER Aluminum Carrier | 50 × 29.5 in. | 500 lb | Lightweight frame and 9-inch rails |
Our Picks: Best Hitch Cargo Carriers With Ramp reviews
1. CURT 18112: Aluminum Carrier With a Folding Ramp and Shank
The CURT 18112 pairs a 50 × 30.5-inch aluminum platform with a built-in ramp. Its three-position ramp can extend for loading, fold upright, or stow flat in the carrier. The ramp also folds in two sections, a design intended to make it easier to handle and reduce wind resistance when it is folded.
The carrier’s shank folds up as well, which can help when parking or storing the rack. That combination of folding parts makes this option appealing if you want to keep a ramp-equipped carrier attached between trips. The listed description names scooters, push mowers, and snow blowers as possible loads.
One important limitation is that the supplied product information does not state a weight capacity. Do not assume it can carry a particular mobility device or piece of equipment without confirming the carrier’s rating and your vehicle’s hitch limits. The supplied listing is also marked unavailable, so check that it can be ordered before making plans.
Pros:
- Large 50 × 30.5-inch platform
- Ramp folds flat into the carrier
- Shank folds up for parking and storage
- Aluminum construction
Cons:
- Capacity is not stated in the supplied product information
- Supplied listing is marked unavailable
Verdict: Consider the CURT if its folding design suits your storage needs, but confirm both availability and rated capacity before choosing it for a heavy load.
2. ECOTRIC: Steel Carrier With a Three-Position Ramp
The ECOTRIC carrier has a 46.2 × 26.8-inch platform and a listed capacity of 500 pounds. Its ramp extends to 38.7 inches and can sit flat, fold into an L shape, or close flat against the platform. Spring-loaded pull locks hold the ramp in position, and a handle is provided for folding and unfolding it.
The carrier is made of heavy-duty steel and weighs 67.3 pounds; the ramp itself weighs 16 pounds. It is designed for 2-inch receivers, including Class III and IV hitches, and has 3-inch safety rails. Tie-down holes around the sides give you places to secure a load. The product description recommends a hitch tightener to reduce wobble; it says one is not included.
Its steel construction and stated capacity make it a clearly specified option, but the carrier’s own weight is worth considering when you calculate the load on your hitch. The ramp length and platform dimensions should also be checked against the wheelbase and loading needs of your specific equipment. Do not carry a mobility device while someone is on it during loading or unloading.
Pros:
- Listed 500-pound capacity
- Three ramp positions and spring-loaded locks
- Tie-down holes and 3-inch safety rails
- Specified compatibility with 2-inch receivers
Cons:
- Steel carrier weighs 67.3 pounds
- Hitch tightener is not included
Verdict: Choose the ECOTRIC if you want a steel carrier with a stated capacity and flexible ramp positions, and your hitch can accommodate the carrier and its load.
3. 50 × 30-Inch Aluminum Carrier: Large Platform With 10-Inch Sides
This carrier combines a 50 × 30-inch aluminum platform with 10-inch sides and a folding ramp. The product description lists a capacity of 800 pounds and says the ramp is 42 inches tall. Integrated tie-down points are intended to help secure cargo, while the sides help contain items that might otherwise shift toward the edge.
The carrier is described as fitting standard 2-inch receivers and having a 9.8-inch shank. Its aluminum construction may be worth considering if you want a large platform without choosing the listed steel carrier. The description also presents it as suitable for mobility scooters, wheelchairs, luggage, and other equipment.
The supplied listing is marked unavailable, and the listed 800-pound capacity should not be treated as the capacity of your hitch or vehicle. Verify the carrier’s exact specifications and order status, then compare its ramp dimensions and loading angle with your equipment. Its listed capacity is the highest among these options, but that figure alone does not make it suitable for every vehicle.
Pros:
- 50 × 30-inch platform with 10-inch sides
- Listed 800-pound capacity
- Folding ramp and integrated tie-down points
- Designed for standard 2-inch receivers
Cons:
- Supplied listing is marked unavailable
- Confirm the load limit of the vehicle and hitch separately
Verdict: This is a potentially spacious option if its stated capacity and dimensions match your needs, but the supplied listing status makes availability an important first check.
4. KQZZIV: Foldable Carrier With an 800-Pound Listed Capacity
The KQZZIV carrier measures 50 × 29 inches and is listed with an 800-pound capacity. Its description says the carrier folds up behind the vehicle when it is not in use, which can help reduce the space it occupies while parked. Red reflectors are included to improve visibility in low-light conditions.
The product description lists a stainless steel frame and aluminum alloy construction, but it does not explain how those materials are combined. It also does not provide the ramp length or receiver size in the supplied details. Those are important points to confirm before purchase, especially if you need a particular ramp reach or a specific hitch fit.
The listing mentions tool-free setup and a two-year warranty. Since the product information does not give a ramp measurement or detailed receiver compatibility, this carrier is harder to compare directly with options that specify those details. Confirm the material, fit, capacity, and ramp setup with the seller before relying on it for a particular load.
Pros:
- 50 × 29-inch platform
- Listed 800-pound capacity
- Fold-up design and red reflectors
- Two-year warranty is stated in the description
Cons:
- Ramp length and receiver size are not specified in the supplied details
- Construction materials need clarification
Verdict: Consider the KQZZIV if the fold-up design appeals to you, but confirm its hitch fit, ramp dimensions, and construction details before choosing it over more fully specified options.
5. ERGOMASTER: Lightweight Aluminum Carrier With 9-Inch Rails
The ERGOMASTER has an aluminum frame, a 50 × 29.5-inch basket, and a listed capacity of 500 pounds. The carrier itself is listed at 40 pounds, making it lighter than the ECOTRIC steel model in this group. Its 41.5 × 27.5-inch ramp is intended for loading scooters, wheelchairs, and lawn mowers.
Four red reflectors and 9-inch side rails are included. Tie-down points give you places to secure your cargo, and the description says the carrier fits Class III or IV 2-inch receivers. Assembly involves three main parts, according to the product information. The maker recommends a speed of 60 mph, adjustable based on cargo weight; follow the vehicle and carrier instructions and drive at a safe speed for the conditions.
The 40-pound listed carrier weight is a practical advantage when you need to install or remove the rack, though the loaded carrier still adds substantial weight to the hitch. Its ramp dimensions are clearly stated, but compare them with your equipment’s wheelbase and the available space behind your vehicle before buying.
Pros:
- Listed 500-pound capacity and 40-pound carrier weight
- 50 × 29.5-inch platform
- Ramp dimensions and 9-inch rail height are stated
- Reflectors and tie-down points included
Cons:
- Requires assembly
- Must be used within the vehicle’s and hitch’s weight limits
Verdict: The ERGOMASTER is a good option to compare if you want a lighter aluminum carrier with stated ramp dimensions and a 500-pound listed capacity.
How to Choose a Hitch Cargo Carrier With a Ramp
Check the full weight limit
A carrier’s listed capacity is only one part of the load calculation. Include the carrier’s own weight and the cargo, then check the limits for your hitch receiver, vehicle, and any other relevant equipment. Use the lowest applicable limit, and do not assume a carrier’s advertised capacity is safe for every vehicle.
Match the platform to your equipment
Compare the platform’s usable length and width with the item you plan to haul. Leave room for secure tie-downs, and check that wheels or other parts will not extend beyond the platform in a way that could make the load unstable. Side rails can help contain cargo, but they do not replace proper tie-downs.
Consider ramp length and loading space
A ramp’s length affects how steep the approach may be, but the ground surface, vehicle height, and equipment all matter too. Check the ramp dimensions and make sure you have enough space behind the vehicle to extend it. A ramp that folds into the carrier or has multiple positions may be easier to store between uses.
Confirm the hitch fit and vehicle clearance
Check the receiver size and hitch class listed for the carrier, then confirm they match your vehicle. Also consider how far the carrier extends behind the vehicle and whether it could interfere with parking, a rear door, or other equipment. The carrier’s weight and the load’s position can affect the demands on your hitch.
Compare material, weight, and storage design
Aluminum carriers can be lighter than steel models, which may make installation and removal easier. Steel models can have a higher listed carrier weight, so include that in your calculations. If you plan to leave the carrier on the vehicle, look at how the platform, ramp, and shank fold and whether that arrangement works with your parking space.
Secure the load and follow safe loading practices
Use suitable straps at the carrier’s tie-down points and check that the cargo cannot shift. Follow the carrier’s instructions, keep the ramp locked as directed, and do not let anyone ride on a mobility device while it is being loaded or unloaded. Before driving, check that the ramp is stowed securely and that the cargo does not block lights or other required vehicle equipment.
Frequently Asked Questions
Can I use a hitch cargo carrier with a ramp for a mobility scooter?
Several options here are described for scooters or wheelchairs, but suitability depends on the scooter’s weight and dimensions, the ramp, and your vehicle’s limits. Confirm those details before loading, and secure the device with appropriate tie-downs.
Does an 800-pound carrier mean my vehicle can carry 800 pounds?
No. The carrier’s stated capacity does not raise the weight limits of your vehicle or hitch. Account for the carrier’s own weight and cargo, and follow the lowest applicable limit in the vehicle, hitch, and carrier instructions.
Are these carriers compatible with any hitch receiver?
No. Several models specify a 2-inch receiver, but you should confirm the fit for the exact carrier and your vehicle. The KQZZIV product details supplied here do not state a receiver size, so verify it before ordering.
Should someone sit on a mobility device while it is being loaded?
No. The ECOTRIC product information specifically says mobility devices should not be occupied during loading or unloading. Follow the carrier and device instructions and keep people clear of the ramp while it is in use.
Is an aluminum carrier always the better choice?
Not necessarily. The aluminum options in this group have listed weights or dimensions that may suit some buyers, while the ECOTRIC steel model provides a stated capacity and ramp positions. Compare the full carrier weight, capacity, construction details, and your ability to install it.
What should I check before driving with a loaded carrier?
Confirm that the load is within all weight limits, secured against movement, and not blocking lights or other required equipment. Make sure the ramp is stowed as directed, then check the carrier and straps again before setting out.
Final Recommendation
For a clearly specified aluminum option, the ERGOMASTER stands out with its listed 500-pound capacity, 40-pound carrier weight, and stated ramp dimensions. The ECOTRIC is worth comparing if you prefer a steel carrier with three ramp positions and a stated 500-pound capacity. For either one, verify receiver fit and calculate the full load against your vehicle’s limits. The CURT and 50 × 30-inch aluminum carrier have useful folding designs and large platforms, but their supplied listings are marked unavailable, so confirm ordering status before choosing them.
