Your Modern LivingPractical guides for everyday living

Furniture & Decor

Best Black Handles For Kitchen Cabinets: 5 Picks Compared

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Guide at a glance

  • 5products compared
  • 9minute read
  • Side-by-side comparison table
  • Who each pick suits best
  • What to check before you buy

Black cabinet handles can give a kitchen a crisp, updated look, but the right choice depends on more than finish. Hole spacing determines whether a pull fits existing cabinets, while material, handle size, and pack count affect how well it suits your project. These five options include 3-inch and 5-inch center-to-center sizes, in stainless steel or zinc alloy, so measure your cabinets before choosing.

Quick Comparison

ProductHole spacingMaterialPack size
Ravinte Matte Black Square Handles, 5 Inch5 inchesStainless steel30
Ravinte Matte Black Handles, 3 Inch3 inchesZinc alloy10
AEEKEL Matte Black Handles, 5-Inch Length3 inchesStainless steel30
Ravinte Matte Black Square Handles, 5-Inch Centers5 inchesZinc alloy30
AEEKEL Matte Black Handles, 5-Inch Centers5 inchesStainless steel30

Our Picks: Best Black Handles For Kitchen Cabinets reviews

1. Ravinte Matte Black Stainless Steel Pulls for 5-Inch Centers

This 30-pack of Ravinte pulls has a square profile and a matte black finish. The handles are listed as stainless steel, with a 5-inch center-to-center measurement. Their overall length is 5.5 inches, and they project 1.4 inches from the cabinet, giving your fingers room to grip the bar.

The 5-inch spacing makes this set a practical option for replacing pulls on cabinets that already have holes at that measurement. The simple shape can work with farmhouse, traditional, or transitional kitchens, as well as more modern rooms. Screws are included, but check the cabinet thickness and the supplied hardware before installation.

Compared with the 5-inch Ravinte zinc-alloy option below, this set is the stainless-steel choice. Its larger projection may suit people who want extra space behind the handle, though it also extends farther from the cabinet. It will not be a direct fit for doors or drawers drilled for 3-inch centers.

Pros:

  • 30 handles in one set
  • Stainless steel construction listed
  • 5-inch hole spacing for matching existing holes
  • Square design and matte black finish suit several decor styles

Cons:

  • Not compatible with 3-inch hole spacing without changing the holes
  • Projects farther than some of the other options

Verdict: Choose this Ravinte set if you need 30 stainless-steel pulls for existing 5-inch centers and prefer a roomier grip.

2. Ravinte Solid Zinc-Alloy Pulls for 3-Inch Centers

This 10-pack is the smaller-set option in the lineup. Each pull is made from solid zinc alloy and has a matte black finish. The center-to-center spacing is 3 inches, with an overall length of 3 5/16 inches and a 1-inch projection.

The shorter bar can suit compact drawers or cabinets where a longer handle would look oversized. It is also the clear choice if your existing holes are 3 inches apart and you want to avoid drilling new ones. Its straight, understated profile pairs easily with other black hardware and appliances.

Compared with the 30-packs, the smaller quantity may be more convenient for a limited refresh, but it may not cover a full kitchen. The product description calls the pulls sturdy, but the listing does not provide a weight or a specific durability test, so choose based on the stated material and dimensions rather than assuming a particular performance level.

Pros:

  • 3-inch spacing fits cabinets drilled for that measurement
  • Solid zinc-alloy construction listed
  • Compact size works well on smaller drawers
  • 10-pack can suit a partial update

Cons:

  • Pack may be too small for a full kitchen
  • Shorter grip may look small on wide drawers

Verdict: Pick this 10-pack for a smaller project or for cabinets with existing 3-inch holes and a preference for zinc-alloy hardware.

3. AEEKEL Stainless Steel Pulls with a 5-Inch Overall Length

This AEEKEL set includes 30 matte black stainless-steel pulls. One detail deserves close attention: the handles are 5 inches long overall, but their mounting holes are 3 inches apart. That distinction can be easy to miss when comparing product names, and it means these are not a direct replacement for pulls with 5-inch centers.

The listing gives a total height of 1.34 inches, a width of 0.47 inches, and a grip distance of 0.87 inches. It also describes smooth edges and individually packaged handles, with four screws per handle and two screw sizes. Those details may help with installation across cabinet doors of different thicknesses, though you should confirm the supplied screws suit your cabinets.

Against the other 3-inch option, this set offers a much larger quantity and a stainless-steel construction. The trade-off is that it has a longer overall profile despite sharing the 3-inch mounting spacing. Measure center to center, not end to end, before ordering.

Pros:

  • 30 pulls for a larger project
  • Stainless steel construction listed
  • Two screw sizes are included
  • Individual packaging helps protect each handle before installation

Cons:

  • 5-inch overall length does not mean 5-inch hole spacing
  • 3-inch centers may require new holes on cabinets with different spacing

Verdict: Consider this AEEKEL set if you want longer-looking pulls with 3-inch centers, but verify the hole measurement carefully before buying.

4. Ravinte Matte Black Zinc-Alloy Pulls with 5-Inch Centers

These Ravinte pulls combine a square bar shape with solid zinc-alloy construction and a flat matte black finish. The set contains 30 handles, each with 5-inch center-to-center spacing. The overall length is 5 3/8 inches, and the listed projection is 1 inch.

That shorter projection, compared with the stainless-steel Ravinte 5-inch option, gives this pull a less extended profile. It may suit a kitchen where you want a straightforward bar handle without as much stand-off from the cabinet face. The matte finish and clean lines are designed to coordinate with a range of cabinet styles.

This set is a strong match for a large update if your existing holes are 5 inches apart. It is not the right pick for 3-inch centers without altering the cabinet. The product listing includes screws, but check their length against your cabinet doors and drawer fronts before fitting the full set.

Pros:

  • 30-pull set for a larger kitchen project
  • 5-inch center spacing is clearly specified
  • Zinc-alloy construction and matte black finish
  • 1-inch projection keeps the pull relatively close to the cabinet

Cons:

  • Not a direct fit for 3-inch holes
  • Zinc alloy may not suit shoppers specifically seeking stainless steel

Verdict: Choose this Ravinte set if your cabinets have 5-inch centers and you prefer zinc alloy with a more compact projection.

5. AEEKEL Stainless Steel Pulls for 5-Inch Centers

This AEEKEL 30-pack is made for cabinets with 5-inch center-to-center spacing. The stainless-steel handles have a matte black finish and measure 5.51 inches overall. The listing also specifies a 1.34-inch height, a 0.43-inch width, and a 0.91-inch grip distance.

Each handle is individually packaged and includes four screws. Two screw lengths are listed: 0.98 inch and 1.69 inches. Having two options can be useful when cabinet fronts vary in thickness, but measure your doors and drawers to confirm which screw is appropriate before installation.

Compared with the Ravinte 5-inch stainless-steel set, this one has a slightly longer overall handle and a smaller stated projection from the cabinet. It also spells out the included screw lengths. Its square, modern styling is a good fit for a clean-lined update, though it may not be the look you want if you prefer rounded or decorative pulls.

Pros:

  • 30 stainless-steel pulls for 5-inch centers
  • Two listed screw lengths provide installation options
  • Individual packaging helps reduce handling scratches before installation
  • Compact width and modern shape

Cons:

  • Only fits existing 5-inch centers without redrilling
  • Square design may not suit every kitchen style

Verdict: This AEEKEL set is a good fit if you need 30 stainless-steel pulls for 5-inch holes and want the included screw lengths clearly stated.

How to Choose Black Handles for Kitchen Cabinets

Measure the hole spacing first

For replacement handles, measure from the center of one mounting hole to the center of the other. This is the center-to-center measurement, and it is more important than the handle’s total length. The options here include 3-inch and 5-inch spacing. In particular, the AEEKEL pull listed as 5 inches long has 3-inch hole centers, so do not rely on overall length alone.

Check the overall size and projection

Handle length affects how a pull looks on a cabinet, while projection is the distance it extends from the cabinet face. A longer handle can look more balanced on a wide drawer, but it may feel oversized on a small door. Projection affects how much room there is to grip the handle and how far it sticks out. Compare the listed dimensions with your cabinet size and the space around it.

Choose a material that fits your priorities

The products in this group are listed as either stainless steel or zinc alloy. If you have a material preference, check the product details rather than assuming all black pulls use the same base material. Material alone does not establish how a particular finish will look or wear in your kitchen, so review the listing details and care guidance before making your choice.

Match the finish and shape to your kitchen

Matte black offers a clear contrast against light cabinets and can coordinate with other black accents. Square bar handles create a simple, modern look, while a plain profile can also work with farmhouse or transitional decor. If you are replacing only some hardware, compare the new handles with your other cabinet pulls, faucet, and appliances to keep the room visually consistent.

Estimate how many pulls you need

Count the cabinet doors and drawers that will receive new hardware, then consider whether each needs a pull. The sets here include 10 or 30 handles. A smaller pack can suit a partial refresh, while a larger set may be more convenient for a whole-kitchen project. Having the count in hand helps you avoid buying too few or too many.

Confirm screw fit before installation

Included screws are useful, but their length still needs to suit the thickness of your cabinet fronts. Some options specify more than one screw size; others only state that screws are included. Check the package details and test the fit before tightening every pull. If you are drilling new holes, mark and measure carefully so the handles line up consistently.

Frequently Asked Questions

How do I measure cabinet handle spacing?

Measure from the center of one screw hole to the center of the next. That center-to-center distance is the spacing used to match a replacement pull. Do not measure from the outer ends of the handle.

Are 5-inch handles always made for 5-inch holes?

No. A handle’s overall length and its mounting-hole spacing are different measurements. The AEEKEL option with a 5-inch overall length has 3-inch centers, so check the specifications for the exact hole measurement.

Can I install these pulls on cabinets with knobs?

It may be possible, but pulls generally require two mounting points. A cabinet with one knob hole may need an additional hole drilled, and the old hole may remain visible. Plan the placement before installation.

Which option is best for existing 3-inch holes?

The Ravinte 3-inch pull and the AEEKEL pull with 3-inch centers are the listed matches. The AEEKEL handle is longer overall, while the Ravinte option is a shorter pull sold in a 10-pack.

Which option is best for existing 5-inch holes?

The Ravinte stainless-steel set, Ravinte zinc-alloy set, and AEEKEL stainless-steel set all list 5-inch center-to-center spacing. Compare their materials, dimensions, pack details, and included screws to choose among them.

Do these sets include mounting screws?

The listings state that screws are included. The AEEKEL options specify multiple screw sizes, while the Ravinte listings also describe included screws. Confirm the screw length against your cabinet thickness before fitting the pulls.

Final Recommendation

For a large update with existing 5-inch holes, the Ravinte stainless-steel set and the AEEKEL 5-inch-center set are straightforward options; the AEEKEL listing provides specific screw lengths, while the Ravinte pulls have a roomier stated projection. For 3-inch holes, the Ravinte 10-pack is a compact choice, and the AEEKEL 30-pack offers a longer overall handle. Measure center to center before ordering, especially when the product name emphasizes handle length rather than hole spacing.

Author

  • Emily

    Emily is the editor of YourModernLiving, where she helps readers make informed decisions about home, kitchen, family, and everyday products. She focuses on researching product features, comparing available options, and creating practical buying guides to help readers find products that suit their needs, preferences, and budgets.

Leave a Comment