Copper-finish cabinet hardware can warm up a kitchen, add a vintage touch, or create contrast against painted cabinets. The options below include long pulls and single-hole knobs in antique copper styles. Before choosing, check the hole spacing on your cabinets: a pull’s center-to-center measurement must match the existing holes if you want to avoid drilling new ones.
One detail to keep in mind: the listed products are made from zinc alloy, iron, or a combination of those materials and have a copper-colored finish. They are not described as solid copper. Our picks range from simple cabinet pulls to decorative knobs, so you can compare size, style, and included hardware.
| Product | Style | Key details | Best for |
|---|---|---|---|
| GRANTENOV 5-Inch Brushed Antique Copper Pull | Long bar pull | 128 mm hole centers; zinc alloy | Replacing standard pulls |
| Cangder Antique Copper Round Knobs | Round knob | 12-pack; 1.18-inch diameter | Single-hole cabinets and drawers |
| Asidrama 5-Inch Antique Copper Pulls | Square-style bar pull | 10-pack; two screw lengths included | A coordinated set of matching pulls |
| khtumeware Rustic Hammered Copper Knobs | Large knob with backplate | 10-pack; 1¾-inch diameter | Rustic or vintage-inspired cabinets |
| GRANTENOV 5-Inch Brushed Antique Copper Handles | Long bar pull | 128 mm hole centers; two screw lengths listed | A low-profile, traditional pull |
Our Picks: Best Copper Hardware For Kitchen Cabinets reviews
1. GRANTENOV 5-Inch Brushed Antique Copper Pulls for Standard Spacing
This GRANTENOV pull has a brushed antique copper look and a straightforward bar shape. Its listed hole spacing is 5 inches, or 128 mm, with an overall length of 6.06 inches. The zinc-alloy construction and 1.10-inch projection give it a more substantial profile than a small cabinet knob.
The 128 mm spacing makes this a candidate for cabinets that already have holes at that measurement. Check the distance between the centers of your existing holes before ordering; overall pull length is not the same as hole spacing. The listed width is 0.51 inch, which keeps the grip relatively slim.
It suits kitchens where you want a simple pull that can also work on bathroom, bedroom, or living-room storage. The product description refers to a brushed antique copper style, while also mentioning an oil-rubbed bronze color. Because finish names can be interpreted differently, look closely at the product images if matching a specific copper tone is important to you.
Pros:
- 128 mm center-to-center spacing is clearly specified.
- Long bar shape offers a larger grip than a small knob.
- Zinc-alloy construction is listed as sturdy and durable.
- Can be used on kitchen cabinets and other furniture.
Cons:
- Sold as a single pull in the supplied product information, so check the listing for pack quantity before planning a full kitchen.
- The product description uses both antique copper and oil-rubbed bronze color language.
Verdict: Choose this pull if your cabinets have 128 mm hole spacing and you want a slim, traditional bar design; confirm the finish and quantity before placing an order.
2. Cangder Antique Copper Round Knobs in a 12-Pack
For a knob rather than a pull, Cangder’s set includes 12 round antique copper-style knobs. Each is listed at 1.18 inches in diameter and uses a single mounting hole. The stated materials are zinc alloy and iron, with rounded edges and a smooth feel described in the product details.
Round knobs can work well on cabinet doors and smaller drawers, and their one-hole mounting makes them a different fit from the two-screw pulls in this guide. The package includes M4 screws listed at 1.18 inches long. Check your door or drawer thickness and the screw length before installation.
The vintage shape is a natural match for traditional or eclectic kitchens, and the 12-piece pack can help create a consistent look across several cabinets. Compared with the longer pulls here, these knobs take up less visual space but provide a smaller grip. That may matter if you prefer a full-hand hold or have large drawers.
Pros:
- 12 knobs are included in the set.
- Single-hole mounting is useful when replacing existing knobs.
- Round, vintage-inspired design suits traditional furniture.
- Listed as zinc alloy and iron with rounded edges.
Cons:
- The smaller knob shape may be less convenient than a bar pull on wide or heavy drawers.
- Only one screw length is specified, so check whether it suits your cabinet thickness.
Verdict: Pick the Cangder set if you need multiple single-hole knobs and prefer a compact vintage look over the longer grip of a cabinet pull.
3. Asidrama 5-Inch Antique Copper Pulls with Two Screw Options
Asidrama’s set contains 10 antique copper cabinet pulls with a square-style design. The product title identifies them as 5-inch pulls, and the description lists two screw lengths: 1 inch and 1.77 inches. That gives you options for different door thicknesses, though you should still compare the screw length with your own cabinets before installation.
The listing describes the pulls as heavy-duty solid zinc and says each handle is individually packaged. This set is intended for use on kitchen cabinets, drawers, dressers, closets, and other furniture. Unlike the GRANTENOV options, the supplied details do not give an overall length, pull width, or projection, so check the listing measurements if those dimensions are important to your grip or clearance.
A 10-pack is useful when you want a coordinated look across several cabinets, but the product information does not state a center-to-center measurement beyond the 5-inch title description. Confirm the exact hole spacing before using these as direct replacements. Their squared profile is a better fit for a more defined, modern-leaning look than a rounded knob.
Pros:
- 10 matching pulls are included.
- Two screw lengths are listed for different door thicknesses.
- Square-style design gives cabinets a more defined look.
- Product details describe a zinc construction and individual packaging.
Cons:
- The supplied description does not list overall length, width, or projection.
- Confirm the exact hole spacing in the listing before replacing existing pulls.
Verdict: This is a practical option if you need a coordinated 10-piece set and like a squared profile, provided the listed dimensions match your cabinets.
4. khtumeware Rustic Hammered Copper Knobs with Backplates
These khtumeware knobs combine a large, 1¾-inch round face with a backplate and a hammered vintage style. The listed projection is 1⅜ inches, so they stand out more from the cabinet than a low-profile knob. Their zinc-alloy construction and antique copper finish are intended for cabinets, drawers, closets, dressers, and other furniture.
The pack includes 10 knobs and two screw lengths: 1 inch and 1.5 inches. The larger face makes this option more decorative than the Cangder round knobs, which measure 1.18 inches across. It can also make a bolder visual statement on a cabinet door, but the projection and size may not suit every space or preference.
The hammered look is well suited to rustic, farmhouse, or vintage-inspired kitchens. Since the product is described as a knob with a backplate rather than a long pull, check the product images and measurements to make sure the shape is what you want. As with any prominent finish, compare the pictured tone with nearby fixtures before coordinating a full room.
Pros:
- 10-piece set offers a consistent decorative look.
- Large 1¾-inch face and backplate create a distinctive style.
- Two screw lengths are included.
- Zinc-alloy construction is listed as strong and durable.
Cons:
- The 1⅜-inch projection may feel bulky on some cabinets.
- The prominent hammered style may not suit minimalist kitchens.
Verdict: Choose these knobs when you want a large, decorative accent for rustic or vintage cabinetry; consider a smaller knob or bar pull if you prefer a subtle profile.
5. GRANTENOV Brushed Antique Copper Pulls with Two Screw Lengths
This GRANTENOV pull has a brushed antique copper finish and a clean bar shape. It measures 5 inches, or 128 mm, center to center, with a total length of 5.83 inches. The listed width is 0.55 inch and the height is 0.95 inch, giving you more size detail than some of the other options.
The product description lists zinc-alloy construction and two screw lengths: 1 inch and 1.57 inches. This can help when fitting cabinets with different panel thicknesses, but it is still important to check the supplied screws against your cabinet before installation. The brand also lists a 365-day exchange and return service.
Compared with the first GRANTENOV pull, this model has a slightly shorter overall length and a slightly wider listed body, while keeping the same 128 mm hole spacing. That makes the hole measurement the key point if you are choosing between the two. Its simpler bar form works across kitchen drawers and cabinet doors without the more decorative profile of the hammered khtumeware knobs.
Pros:
- 128 mm center-to-center spacing is clearly listed.
- Overall length, width, and height are specified.
- Two screw lengths are included according to the product details.
- Simple bar design is suitable for multiple rooms and furniture types.
Cons:
- The product details do not specify a pack quantity, so confirm how many pulls are included.
- Its finish may look different beside other copper or bronze fixtures.
Verdict: This is a strong choice if you want a straightforward 128 mm pull with more listed dimensions and screw options; verify the pack quantity and finish before buying.
How to Choose Copper Hardware for Kitchen Cabinets
Measure the Existing Hole Spacing
For a two-screw pull, measure from the center of one mounting hole to the center of the other. This is the center-to-center measurement, not the total length of the handle. The GRANTENOV pulls list 128 mm hole spacing. If your cabinet already has holes, match that measurement to avoid drilling new ones or leaving exposed holes.
Choose Between Pulls and Knobs
Bar pulls give you a longer grip and can be useful on wide drawers or cabinet doors. Knobs use a single mounting hole and create a smaller, more traditional accent. The Cangder set is a compact round knob, while the khtumeware option is larger and has a backplate. Think about both appearance and how you prefer to open your cabinets.
Check the Finish and Style
Antique copper can look different from one product to another, and the descriptions here use terms such as brushed, rustic, and hammered. Compare the product images with your faucet, lighting, and other nearby hardware. If you want the room to feel coordinated, choose a finish and design that work together rather than assuming all copper-colored hardware will match exactly.
Consider Material and Build
The products in this guide are described as zinc alloy, zinc alloy and iron, or heavy-duty solid zinc. They are not listed as solid copper. Review the material details if the distinction matters to you, and consider the shape and size of the hardware along with its stated construction.
Match Screw Length to Cabinet Thickness
Some sets list more than one screw length, while others specify only one. A screw that is too short may not secure the hardware as intended, while one that is too long may not suit the cabinet panel. Measure the door or drawer front and check the product’s screw details before installing.
Check Projection and Grip Size
Projection is how far the hardware stands out from the cabinet. The first GRANTENOV pull lists a 1.10-inch projection, while the khtumeware knobs list 1⅜ inches. A larger projection can offer more room for your fingers but may look or feel too prominent in a compact kitchen. Look at the listed width and overall size as well as the style.
Confirm Pack Quantity
Pack size affects how many cabinets you can update at once. Cangder lists 12 knobs, Asidrama lists 10 pulls, and khtumeware lists 10 knobs. The supplied information for the GRANTENOV products does not state a pack quantity, so check the Amazon listing before calculating how many to order.
Frequently Asked Questions
Are these cabinet pulls made of solid copper?
No. The supplied product details describe zinc alloy, zinc alloy and iron, or solid zinc construction with an antique copper or copper-colored finish. They are copper-style hardware, not products described as solid copper.
What does 128 mm center to center mean?
It is the distance between the centers of the two screw holes on a cabinet pull. Measure your cabinet holes from center to center and compare that measurement with the pull’s listed spacing. The overall length of the pull is a separate measurement.
Can I replace a cabinet knob with a pull?
Usually, a pull needs two mounting holes, while a knob uses one. Changing from a knob to a pull may require drilling an additional hole. Check the hardware dimensions and your cabinet layout before choosing a replacement.
Do the products include mounting screws?
The product details say that Cangder includes M4 screws, Asidrama includes two screw lengths, and khtumeware includes 1-inch and 1.5-inch screws. The GRANTENOV descriptions also list screw lengths. Confirm the specific listing and check whether the included screws suit your cabinet thickness.
Which option is best for a rustic kitchen?
The khtumeware knobs have a hammered vintage style and a backplate, making them the most overtly decorative choice in this group. The Cangder knobs also have a vintage look, but their smaller round shape is more understated.
Which option is best for replacing existing pulls?
Start with the hole spacing, not the style. The GRANTENOV pulls list 128 mm center-to-center spacing. The Asidrama title identifies a 5-inch pull, but its supplied description does not provide further dimensions, so check the listing carefully before using it as a direct replacement.
Final Recommendation
For a straightforward pull with clearly stated 128 mm hole spacing and useful size details, the GRANTENOV 5-inch brushed antique copper handles are a practical place to start. If you need a coordinated set, compare the 10-piece Asidrama pulls with the 12-piece Cangder knobs based on your cabinet holes and preferred grip. For a bolder vintage accent, the khtumeware hammered knobs stand apart. Whatever style you choose, verify measurements, pack quantity, screw length, and finish before ordering.