Your Modern LivingPractical guides for everyday living

Storage & Dining

Best Drip Tray For Beer Tap: 5 Options Compared for Every Setup

Updated 8 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Guide at a glance

  • 5products compared
  • 8minute read
  • Side-by-side comparison table
  • Who each pick suits best
  • What to check before you buy

A good drip tray keeps beer foam, faucet drips, and glass run-off off your counter. The right choice depends on the space under your tap, whether you can connect a drain, and how much liquid you need the tray to catch. Below are five stainless steel options, from a long surface-mount tray to compact trays for a single tap.

Quick Comparison

ProductSizeMounting and drainBest suited for
Gerrii 31.5-Inch Surface-Mount Drip Tray31.5 x 4.72 inchesSurface mount; no drainLong counters and multi-tap areas
SiliFine Wall-Mount Drip Tray10 x 6 inchesWall mount; no drainCompact draft setups
WELLBOM 12 x 5-Inch Drip Tray12 x 5 inchesDetachable; no drain specifiedSingle-tap towers and easy cleanup
DasMarine 12 x 5-Inch Surface-Mount Tray12 x 5 x 0.75 inchesSurface mount; no drainSingle-tap systems with a removable grate
Homend 12 x 5-Inch Flush-Mount Tray12 x 5 x 0.75 inchesFlush mount; threaded drainSetups with a drain hose or pipe

Our Picks: Best Drip Tray For Beer Tap reviews

Gerrii 31.5-Inch Tray: Best for a Long Bar Surface

The Gerrii stands out for its length: at 31.5 inches, it offers much more coverage than the 12-inch trays in this lineup. It is designed to sit on a countertop or bar surface, where it can catch drips and overflow from beer or beverage dispensers. That extra span may be useful if your taps are spread out or you want a larger area to catch spills.

The tray is made from brushed stainless steel, with welded and polished corners and seams. Its removable cover makes cleanup more convenient, but this is a no-drain design: you will need to lift or empty the tray and rinse it by hand. Measure your counter before buying, since its long footprint may be excessive for a compact kegerator.

Pros:

  • Long 31.5-inch coverage for wider serving areas
  • Brushed stainless steel construction
  • Removable cover for cleaning
  • Can be used on a countertop or bar surface

Cons:

  • No drain, so collected liquid must be emptied
  • Long footprint may not suit smaller counters

Verdict: Choose the Gerrii if broad surface coverage matters more than a compact fit or plumbed drainage.

SiliFine Wall-Mount Tray: A Compact Option for Draft Setups

This SiliFine tray is a compact wall-mounted choice measuring 10 x 6 inches. The listing describes it as a 304 stainless steel tray with a polished finish. Its smaller size can work well under a single tap or a compact beer tower, while the listed capacity is intended to accommodate multiple glasses.

Installation requires attaching it to a wall with screws, which are not included. That makes placement important: check the wall and tap position before choosing a spot. Like the other no-drain models, it needs to be removed or emptied for cleaning. The supplied product information marks this item as unavailable, so check the listing before planning around it.

Pros:

  • Compact 10 x 6-inch size
  • 304 stainless steel construction
  • Wall-mounted design keeps the counter area clear
  • No drain connection to install

Cons:

  • Mounting screws are not included
  • Requires manual emptying and availability may be limited

Verdict: Consider the SiliFine if you want a compact wall-mounted tray and can confirm that it is available and fits your installation.

WELLBOM 12 x 5-Inch Tray: Best for Straightforward Cleanup

The WELLBOM is a 12 x 5-inch stainless steel tray for collecting drips, foam, and condensation beneath a tap or dispenser. Its listing specifies 304 stainless steel and a polished, seamless design. The tray detaches for emptying, and the product information says it can be rinsed or cleaned in a dishwasher.

Its size is a practical middle ground: more compact than the Gerrii, but wide enough for a typical single-tap area. The product description also notes that it can be used for drink mixing. It does not specify a drain connection, so plan to remove it for emptying rather than relying on continuous drainage. Measure carefully, as the listing specifically advises checking dimensions before purchase.

Pros:

  • 304 stainless steel construction
  • Detaches for emptying and cleaning
  • Polished seamless design for easier wipe-downs
  • Suitable for home or commercial draft setups

Cons:

  • No drain connection is specified
  • Its 12 x 5-inch footprint may not fit every tower or counter

Verdict: The WELLBOM is a sensible pick if you want a removable, easy-to-clean tray and do not need a plumbed drain.

DasMarine Surface-Mount Tray: Best for a Single Tap

The DasMarine is a 12 x 5-inch surface-mount tray made from 304-grade sanitary stainless steel. It is designed for a single-tap draft beer system and catches both faucet drips and run-off from a pint glass. At 0.75 inches tall, it has a low profile compared with deeper trays.

A removable grate with flat louvers gives glasses a surface to rest on while liquid collects below. The tray has no drain, so you empty it into a sink and rinse it; the listing also says the grate can go in a dishwasher. This is a straightforward choice if you want a compact tray and do not need to route liquid through a hose. The supplied product information marks it as unavailable, so confirm its listing status before selecting it.

Pros:

  • 304-grade stainless steel
  • Removable grate for cleaning
  • Designed to catch faucet drips and glass run-off
  • Compact 12 x 5-inch surface-mount format

Cons:

  • No drain, so it must be emptied by hand
  • Availability may be limited

Verdict: Choose the DasMarine if its simple single-tap layout suits your bar and the listing is available when you shop.

Homend Flush-Mount Tray: Best for a Connected Drain

The Homend is the only model in this group with a drain. It is a 12 x 5-inch flush-mount tray made from 304-grade sanitary stainless steel, designed to collect drips and pint-glass run-off from a single-tap system. Its threaded drain can connect to a 3/4-inch PVD drain pipe for use with 1/2-inch inside-diameter vinyl drain hose, according to the product details.

Flush mounting creates a different installation job from simply placing a tray on a counter. You will need a suitable cutout and a compatible drain setup, so check the dimensions and fittings before buying. If your bar has no way to route the drain, a no-drain tray will be easier to install and maintain. The Homend is listed as available in the supplied product data.

Pros:

  • Threaded drain for a connected hose or pipe
  • 304-grade stainless steel construction
  • Flush-mount design for a built-in installation
  • Compact size for a single-tap system

Cons:

  • Requires a suitable counter cutout
  • Drain fittings and installation need to match your setup

Verdict: The Homend is the best fit if you want a built-in tray and have the space and plumbing to connect its drain.

How to Choose a Drip Tray for a Beer Tap

Measure the Space Under Your Tap

Check the available length, width, and height beneath your faucet before choosing a tray. A long model such as the Gerrii needs considerably more counter space than a 12 x 5-inch tray. Also make sure the tray will sit where drips land and leave enough room to set down and lift glasses.

Choose the Right Mounting Style

Surface-mount trays sit on a countertop or bar surface and generally avoid the need to cut into the counter. A wall-mounted tray needs a suitable place to attach it, and the SiliFine listing notes that screws are not included. A flush-mount tray such as the Homend calls for a counter cutout, so it is best planned as part of the bar installation.

Decide Whether You Need a Drain

No-drain trays collect liquid until you empty and rinse them. That keeps installation simpler, but you need to check and empty the tray as needed. A drain-connected tray can direct liquid away from the surface, but it requires compatible plumbing or a hose and a suitable route. Do not assume a drain fitting will match your existing setup; verify the thread and hose specifications first.

Consider the Material and Cleaning Routine

The listed trays use stainless steel, with several specifying 304-grade stainless steel. Removable covers or grates can make it easier to clean parts separately, while a seamless surface can simplify wiping. Check each product’s cleaning instructions: the WELLBOM and DasMarine listings mention dishwasher cleaning for specific parts or surfaces, while other models emphasize rinsing or manual emptying.

Match Tray Size to Your Serving Needs

A compact tray may suit a single tap and take up less counter space. A longer tray can give you more spill-catching coverage across a wider serving area, but it also needs a larger footprint. Consider whether you need space for one glass at a time or want room to catch overflow across more than one serving position.

Check What Comes with the Tray

Compare the included parts and installation details before ordering. For example, the DasMarine listing describes a removable grate, while the Homend listing specifies a threaded drain. The SiliFine requires wall screws that are not included. Confirm what hardware, grate, or drain components you will need so you can plan the full setup.

Frequently Asked Questions

What size drip tray should I get for a beer tap?

Measure the area beneath your tap and choose a tray that covers where drips and glass run-off land. A 12 x 5-inch model is a compact option for many single-tap setups, while the 31.5-inch Gerrii provides much wider coverage.

Is a drain necessary for a beer drip tray?

No. A no-drain tray catches liquid for you to empty and rinse later. A connected drain can reduce the need for manual emptying, but it requires compatible fittings and a suitable plumbing route.

Can a beer drip tray be mounted on a wall?

Some can. The SiliFine is described as a wall-mount model and attaches with screws that are not included. Make sure the wall location lines up with your tap and allows room for glasses.

What is the difference between surface-mount and flush-mount trays?

A surface-mount tray sits on top of the counter or bar. A flush-mount tray is installed into a cutout so it sits within the surface. Flush mounting can create a built-in look, but it requires more planning and installation work.

How often should I empty a no-drain tray?

It depends on how often you use the tap and how much liquid collects. Check the tray during use and empty it before it becomes full. Regular rinsing helps keep residue from building up.

Are stainless steel drip trays easy to clean?

They are generally designed for rinsing or wiping, but cleaning details vary by product. Some listings specify removable parts or dishwasher cleaning. Follow the care directions for the particular tray you choose.

Final Recommendation

For a straightforward single-tap setup, the WELLBOM offers a useful balance of compact size, removable construction, and easy-cleaning details. Choose the Gerrii if you need a much longer collection area, or the Homend if your bar is ready for a flush-mounted tray with a connected drain. Before ordering any model, measure your space and confirm the mounting and drainage requirements.

Author

  • Emily

    Emily is the editor of YourModernLiving, where she helps readers make informed decisions about home, kitchen, family, and everyday products. She focuses on researching product features, comparing available options, and creating practical buying guides to help readers find products that suit their needs, preferences, and budgets.

Leave a Comment