The best grease filter for your cooker hood is the one that fits securely, keeps air moving, and can be cleaned or replaced without hassle. Before buying, compare your old filter’s measurements and attachment style with the replacement—not just the appliance brand. These five options range from model-specific replacements to mesh sheets that you can trim to size.
Quick Comparison
| Product | Type and size | Best for | Key consideration |
|---|---|---|---|
| Quwfesudy 2-Pack Whirlpool Grease Filters | Aluminum cartridges; model-specific | Owners of listed Whirlpool hoods | Confirm your exact model number |
| BGEARNIC 3-Pack Mesh Filters | 13.4 × 11 × 0.4 inches; five-layer mesh | Hoods that match the size or listed models | Listing is marked unavailable in the supplied product information |
| E-Supervac Cut-to-Size Mesh Filter | 19.1 × 15.7 inches; trimmable sheet | Hoods that need a custom-sized mesh | Requires careful measuring and cutting |
| Septoolshop 2-Pack Metal Filters | 13 × 9 × 0.4 inches; five-layer mesh | Hoods that take this specific filter size | Check the old filter’s dimensions before ordering |
| YGYGY 2-Pack Aluminum Mesh Filters | 30 × 25 cm; five-layer mesh | Hoods that use a 30 × 25 cm filter | Measure the existing filter to confirm fit |
Our Picks: Best Grease Filter For Cooker Hood reviews
Quwfesudy 2-Pack: A Model-Specific Whirlpool Replacement
This two-piece replacement set is designed for Whirlpool range hood models WVW73UC6LS0, WVW53UC0LS0, and WVW53UC6LS0. Unlike a universal sheet that needs trimming, these are cartridges intended to replace the original filters directly.
The filters are made from aluminum and are described as washable and wipeable. Having two in the set gives you a spare to use while the other is being cleaned. The main strength here is the stated model compatibility, but it is only helpful if your hood matches one of those exact model numbers.
Take a moment to check the appliance label or your existing filter before ordering. A similar-looking Whirlpool hood may use a different filter, and the product information does not provide general dimensions for checking fit another way. As with other metal mesh grease filters, this is for grease capture; it is not a replacement for a charcoal filter when a recirculating hood needs odor control.
Pros:
- Designed for three specific Whirlpool hood models
- Two filters included
- Aluminum construction
- Product information says the filters can be washed and wiped
Cons:
- Compatibility is limited to the listed models
- No filter dimensions are provided in the product details
Verdict: Choose this set if your hood’s model number matches one of the three listed Whirlpool models; otherwise, compare dimensions and part numbers before buying.
BGEARNIC 3-Pack: Five-Layer Filters for a Matching Hood
This set contains three aluminum mesh filters measuring about 13.4 × 11 × 0.4 inches. The five-layer mesh design is intended to trap grease while allowing cooking exhaust to pass through. The product lists several compatible hood models and also suggests comparing its dimensions with your current filter.
The three-filter quantity may be useful if you want replacements on hand, but size and fit matter more than the set count. The product details also suggest checking for part reference number 31329014 inside the hood. Use that reference, your appliance model, and the stated dimensions to help verify compatibility rather than relying on appearance alone.
This listing is marked unavailable in the supplied product information, so check its current status before planning around it. If it is not available, the E-Supervac cut-to-size sheet may be an alternative for a hood that accepts a trimmed mesh filter, though the installation style may differ.
Pros:
- Three filters in the set
- Five-layer aluminum mesh construction
- Dimensions and several compatible models are listed
- Includes a part-reference number to help with fit checks
Cons:
- Listing is marked unavailable in the supplied product information
- Fit needs careful confirmation by size or model
Verdict: Consider this set if it becomes available and your hood matches its dimensions or compatibility details; do not order based on the general “range hood” label alone.
E-Supervac Cut-to-Size Filter: A Flexible Option for Custom Dimensions
This aluminum mesh sheet measures 19.1 × 15.7 inches and is designed to be cut to a cooker hood’s required size. It can be a practical choice when an exact replacement is difficult to find, provided your hood uses a mesh filter that can be trimmed and secured with its existing retainer.
The product describes a multi-layer mesh that creates a zigzag airflow path to capture grease and particles. Its main advantage over fixed-size filters is the ability to customize the dimensions. The trade-off is that you need to measure accurately, cut carefully, and make sure the finished edges fit the hood’s filter frame.
This is not a direct-fit cartridge, so it may not suit a hood that needs a rigid filter with built-in clips or a specific molded shape. Check how your current filter attaches before choosing a sheet-style replacement. Trimming also means there is less room for error than with a correctly sized, ready-made filter.
Pros:
- Large sheet can be trimmed to custom dimensions
- Aluminum mesh construction
- Useful when a fixed-size filter is hard to match
- Product information describes a multi-layer grease-trapping design
Cons:
- Requires careful measuring and cutting
- May not fit hoods that require a rigid, shaped cartridge
Verdict: Pick this sheet if your hood accepts cut-to-size mesh and you are comfortable trimming it to fit; choose a model-specific cartridge for a simpler replacement.
Septoolshop 2-Pack: Five-Layer Filters in a Compact Size
Septoolshop’s set includes two aluminum mesh filters measuring 13 × 9 × 0.4 inches. The product describes a five-layer design intended to capture grease while maintaining airflow. Its straightforward size makes it easy to compare against an old filter, but the broad compatibility wording should not replace a measurement check.
These filters may suit a hood that uses a flat metal mesh panel in the listed dimensions. They are a less specific choice than the Whirlpool set above because the product details do not identify a list of exact hood models. Check the frame, thickness, and way the filter is held in place as well as the length and width.
The two-pack offers a spare, but the product details do not specify a cleaning method or a replacement schedule. Follow your hood maker’s care instructions, and make sure a cleaned filter is fully dry before putting it back in place.
Pros:
- Two aluminum mesh filters included
- Five-layer construction is specified
- Dimensions are clearly stated
- Suitable to consider for a hood that takes a flat filter of this size
Cons:
- No exact hood model list is provided
- Cleaning and replacement guidance is not specified in the product details
Verdict: This is a reasonable size-matched option if your current filter measures 13 × 9 × 0.4 inches and uses the same style of frame.
YGYGY 2-Pack: Washable Mesh Filters in a 30 × 25 cm Size
This two-pack of aluminum mesh filters measures 30 × 25 cm, or roughly 11.8 × 9.8 inches. Each filter has five mesh layers, and the product describes the panels as washable. That makes this a useful option to consider if your existing filter uses metric dimensions close to those measurements.
The product advises checking the size of the old filter before ordering and suggests replacement every three to six months. Treat that interval as product guidance rather than a rule for every household: how often a filter needs attention depends on use and the hood maker’s care instructions. Regular cleaning can also help prevent grease from building up.
Compared with the Septoolshop filter, this one is slightly different in stated dimensions and is specifically described as washable. Neither option provides a model list in the product details, so a careful measurement and frame check are important. A filter that is too small may leave gaps; one that is too large may not sit securely.
Pros:
- Two filters included
- Five-layer aluminum mesh construction
- Described as washable
- Useful for hoods that take a 30 × 25 cm filter
Cons:
- No specific hood models are listed
- Size must be checked carefully before purchase
Verdict: Choose this set if your hood takes a washable mesh filter of about 30 × 25 cm and the panel’s thickness and attachment style also match.
How to Choose a Grease Filter for Your Cooker Hood
Match the Model Number or Part Reference
Start with the cooker hood’s model number, which is often printed on a label inside the unit. A model-specific replacement can be easier to install, but only if the model number matches exactly. You can also check the part number printed on the old filter or listed in your appliance manual. Do not assume that filters for similar-looking hoods are interchangeable.
Measure the Existing Filter
If you cannot confirm compatibility by model or part number, remove the old filter and measure its length, width, and thickness. Compare all three measurements with the replacement listing. For a cut-to-size sheet, measure the filter opening and the old filter, then check that the new material can be held securely by the existing frame or retainer.
Check the Shape and Attachment
Not all grease filters install the same way. Some are flat mesh panels, while others are cartridges designed for a particular hood. Look at the clips, frame, and edges on your current filter. A replacement that has the right overall dimensions may still be unsuitable if it cannot sit flat or lock into place.
Choose Mesh or a Trimmed Sheet for Your Needs
Aluminum mesh filters are intended to capture grease from cooking exhaust while allowing airflow. A ready-sized panel is a simpler choice when the dimensions match. A cut-to-size sheet offers more flexibility, but needs careful trimming and may not work with a hood that requires a rigid cartridge. More mesh layers are a stated design feature, but fit and proper maintenance are essential too.
Understand What a Grease Filter Does
A metal grease filter helps catch grease carried in cooking exhaust. It does not necessarily remove odors. If your hood recirculates air back into the kitchen, it may use a separate charcoal filter for odor control; check your appliance instructions to see what your setup needs. A grease filter and a charcoal filter serve different purposes.
Follow Care Instructions
Cleaning guidance varies by filter and appliance. Check the hood manual and the filter maker’s instructions before washing a replacement. Clean the filter as needed for your cooking habits, and inspect it for damage or a poor fit when reinstalling it. If the filter no longer sits securely or is damaged, replace it with a compatible part.
Frequently Asked Questions
How do I know which grease filter fits my cooker hood?
Check the hood’s model number, the part reference on the old filter, and the filter’s length, width, and thickness. Also compare the frame and attachment style. Use more than one of these checks when possible, especially for filters described as universal.
Can I cut a cooker hood grease filter to size?
Some mesh sheets are designed to be trimmed, such as the E-Supervac option in this guide. Do not cut a model-specific cartridge or rigid filter unless its instructions allow it. Make sure the trimmed sheet can be secured without leaving gaps.
Are aluminum mesh grease filters washable?
Some product listings specifically describe their filters as washable, including the Quwfesudy and YGYGY options here. Care instructions can vary, so check the filter details and your hood manual before cleaning. Make sure the filter is dry before reinstalling it.
Will a metal grease filter remove cooking odors?
A metal mesh filter is designed mainly to catch grease in the cooking exhaust. It is not the same as an odor-control charcoal filter. If your hood recirculates air, check the appliance manual to see whether it requires a separate charcoal filter.
How often should I clean or replace a grease filter?
There is no single schedule for every hood and household. Follow the appliance and filter instructions, and check the filter regularly for grease buildup or damage. The YGYGY product suggests replacement every three to six months, but that is product-specific guidance, not a universal interval.
Can I use a filter with similar dimensions if the brand is different?
Possibly, but dimensions alone may not be enough. The replacement also needs the right thickness, shape, and attachment method to sit securely in your hood. Confirm compatibility before buying, and choose a model-specific part when the exact match is available.
Final Recommendation
For a direct replacement, the Quwfesudy two-pack is the clearest choice if you own one of its listed Whirlpool models. If your hood uses a standard flat mesh panel, compare your old filter’s measurements with the Septoolshop or YGYGY options. The E-Supervac sheet offers more sizing flexibility, but takes extra work and may not fit cartridge-style hoods. Whatever you choose, verify the model, dimensions, and attachment before ordering.
