A range hood grease filter only works well when it fits your hood and is kept clean. The options below include replacement filters for specific Broan and NuTone hoods, plus a smaller filter compatible with select Whirlpool, KitchenAid, and Jenn-Air models. Before you buy, compare the filter’s dimensions and part number with the label inside your hood or with your existing filter.
Quick Comparison
| Product | Size | Pack | Best fit for |
|---|---|---|---|
| Fetechmate BPS1FA30 Aluminum Mesh Filters | 11-3/4 × 14-1/4 × 3/8 inches | 2 filters | Select Broan and Sears hood models |
| HUTUDAN 5-Layer Aluminum Filters | 8.75 × 7.5 inches | 4 filters | Select Whirlpool, KitchenAid, and Jenn-Air models |
| oneket BPS1FA30 Aluminum Filters | 11-3/4 × 14-1/4 inches | 2 filters | Select Broan and Sears hood models |
| ENKTIK S99010430-002 Filters | 13-7/8 × 15-3/4 × 3/8 inches | 2 filters | Select Broan and NuTone hoods |
| Kamrexi S99010430-002 Filters | 13-7/8 × 15-3/4 × 3/8 inches | 2 filters | Select Broan and NuTone HPFA130 models |
Our Picks: Best Grease Filters For Range Hoods reviews
Fetechmate BPS1FA30: A Practical Match for Select Broan Hoods
This two-pack of aluminum mesh filters is made for hoods that use the BPS1FA30 size and compatible part numbers. Each filter measures 11-3/4 by 14-1/4 by 3/8 inches. The listed fit includes select Broan 30-inch QS1, WS1, and WS2 models, as well as Sears 5260 30-inch hoods.
The filter uses an aluminum foil pad between two expanded aluminum sheets. A nylon handle is intended to make removal and replacement easier. The filters can be soaked in hot water with a degreasing solvent, which makes routine cleaning possible without treating them as disposable after every buildup of grease.
This is a sensible choice if your existing filter carries a matching part number and you want a replacement pair. Its compatibility list is specific, however, so the dimensions and model information matter more than the general phrase “range hood filter.” It is not the right size for the larger S99010430-002 filters in this guide.
Pros:
- Two filters per package
- Specific fit information for select Broan and Sears models
- Aluminum mesh construction with an internal foil pad
- Nylon handle designed to help with filter changes
Cons:
- Compatibility is limited to hoods that use the listed size or part numbers
- Requires regular cleaning to help prevent grease buildup
Verdict: Choose the Fetechmate pair if your hood calls for BPS1FA30 or a listed equivalent and you want a washable, handled replacement.
HUTUDAN 5-Layer Filters: A Four-Pack for Select Whirlpool, KitchenAid, and Jenn-Air Hoods
HUTUDAN’s four-pack is a smaller replacement option, measuring 8.75 by 7.5 inches. Its five-layer aluminum mesh is designed to catch grease, while the reinforced frame is intended to hold up to repeated cleaning. The package description also states that the filters are dishwasher-safe.
The listed compatible brands include Whirlpool, KitchenAid, and Jenn-Air. It also gives several replacement part numbers, including W10727013 and W10915369, along with example hood models. Since the filters are considerably smaller than the other options here, checking the size of your original filter is especially important.
The four-filter pack can be convenient if you need multiple replacements or want spares on hand. The trade-off is that its compatibility list is model-specific; brand name alone is not enough to confirm fit. Confirm your hood model or original part number before ordering.
Pros:
- Four filters in one package
- Five-layer aluminum mesh design
- Listed as dishwasher-safe
- Compatibility details include replacement part numbers and example models
Cons:
- Fits a much smaller filter area than the other options in this guide
- Requires a close model or size match to confirm compatibility
Verdict: This is a useful option if your hood uses the 8.75-by-7.5-inch filter size and you value having four replacements together.
oneket BPS1FA30: A Straightforward Two-Pack for Matching Hood Sizes
The oneket filter is another two-pack for the BPS1FA30 size, measuring 11-3/4 by 14-1/4 inches. Its listed fit includes select Broan 30-inch QS1, WS1, and WS2 models, along with Sears 5260 30-inch hoods. The description recommends checking the label inside the hood or comparing the dimensions of your old filter.
These filters use aluminum construction and are designed for removal and replacement without professional tools. The description suggests cleaning them with hot water and detergent. That straightforward care routine may suit kitchens where the filter is cleaned regularly rather than left to collect heavy grease.
Compared with the Fetechmate BPS1FA30 option, the oneket description does not call out a nylon handle or an internal foil pad. Its main appeal is the familiar size and clear model-checking guidance. As with any compatible replacement, verify the part number and dimensions before purchase.
Pros:
- Two filters in the package
- Listed for select Broan and Sears models
- Aluminum construction
- Designed for simple, tool-free replacement
Cons:
- Compatibility depends on matching the hood model or filter size
- The product description does not specify a handle or internal foil pad
Verdict: Pick the oneket pair if your hood uses the listed BPS1FA30 dimensions and you want a basic aluminum replacement without extra design details.
ENKTIK S99010430-002: A Larger Two-Pack with a Pull Tab and Spring Clip
These ENKTIK filters measure 13-7/8 by 15-3/4 by 3/8 inches and are sold as a two-pack. They are listed as compatible with S99010430-002 and various Broan and NuTone hood setups. The product description identifies them as compatible parts rather than original manufacturer parts.
The filters have multi-layer aluminum mesh and a pull tab with a spring clip for installation and removal. Those details are useful when you need to take the filter out for cleaning. The listed size is larger than the BPS1FA30 filters, so this is not an interchangeable substitute for a smaller hood opening.
The compatibility language covers multiple hood systems, but it does not make every Broan or NuTone hood a match. Check your model and the dimensions of the filter you are replacing. If your hood uses the S99010430-002 size, this option offers the pull-tab design in a two-filter package.
Pros:
- Two filters in the package
- Pull tab and spring clip for removal and installation
- Multi-layer aluminum mesh construction
- Clearly identified as a compatible replacement part
Cons:
- Does not fit the smaller BPS1FA30 dimensions
- Compatibility still needs to be confirmed for your hood model
Verdict: Consider ENKTIK if your hood calls for the S99010430-002 size and you want a replacement with a pull tab and spring clip.
Kamrexi S99010430-002: A Reinforced-Frame Option for HPFA130 Hoods
Kamrexi’s two-pack measures 13-7/8 by 15-3/4 by 3/8 inches, matching the larger S99010430-002 size. The listed compatibility includes Broan NuTone HPFA130 and several hood model numbers. Each filter has two tension springs and a pull tab on the short side to help with fitting and removal.
The aluminum mesh is reinforced with a stainless steel frame, according to the product details. That construction is intended to keep the filter intact through repeated cleanings. For maintenance, the description recommends soaking it in hot water with detergent, gently scrubbing with a soft brush, rinsing, and allowing it to dry.
Compared with the ENKTIK option, Kamrexi gives more detail about the frame material and cleaning process, while both products share the same listed dimensions and a two-filter pack. Choose based on the exact compatibility information for your hood and the features you prefer; do not assume that the two filters fit every model listed under Broan or NuTone.
Pros:
- Two filters with the larger S99010430-002 dimensions
- Aluminum mesh with a stainless steel frame
- Two tension springs and a pull tab for handling
- Cleaning instructions are provided
Cons:
- Not suitable for hoods that use the smaller BPS1FA30 filter
- Model compatibility should be checked before ordering
Verdict: Kamrexi is a strong match to consider if your hood uses the listed HPFA130 or S99010430-002 size and you want a reinforced frame.
How to Choose a Grease Filter for Your Range Hood
Match the size of your old filter
Measure the old filter from edge to edge, including its thickness if that measurement is listed. A filter that is too large may not slide into place, while one that is too small may not sit securely in the hood. Compare all dimensions in the listing with your original filter, not just one side.
Check the hood model and filter part number
Many replacement filters are made for specific hood models or part numbers. Look for a label inside the hood, often visible after you remove the old filter. Compare that information with the product’s compatibility list. Brand alone is not enough: a filter listed for one Broan, Whirlpool, KitchenAid, or Jenn-Air model may not fit every hood from that brand.
Consider the filter material and construction
These options use aluminum mesh, with some designs adding multiple layers, a foil pad, or a reinforced frame. A mesh filter is designed to capture grease while allowing air to pass through the hood. Features such as a handle, pull tab, or spring clip may make removal easier, but the filter still needs to fit the hood correctly.
Choose a pack size that suits your routine
Two-packs can provide a spare to keep on hand, while a four-pack may be useful if your hood takes that particular filter size and you prefer to stock up. Compare the package quantity only after confirming the fit. A larger pack does not help if the filters are the wrong dimensions for your appliance.
Check how the filter should be cleaned
Cleaning directions vary by product. Some listings recommend soaking in hot water with detergent or a degreasing solution; another describes the filters as dishwasher-safe. Follow the care guidance for the filter you choose, and make sure it is fully dry before putting it back in the hood.
Know what a grease filter is designed to do
A grease filter captures grease particles as cooking air passes through the range hood. It is not a substitute for a hood’s ventilation system or for regular cleaning of the hood itself. Keeping the filter clean helps avoid accumulated grease restricting the filter’s open mesh area.
Frequently Asked Questions
How do I know which grease filter fits my range hood?
Check the part number on the label inside the hood, then compare it with the replacement filter’s listed part numbers. You can also measure your existing filter and compare its length, width, and thickness with the product dimensions.
Can I use a Broan filter in any Broan range hood?
No. The products in this guide are listed for particular Broan or NuTone models and part numbers. Confirm your exact hood model or old filter size rather than relying on the brand name alone.
Are aluminum mesh range hood filters washable?
The products here include cleaning directions for aluminum mesh filters. Depending on the specific filter, the instructions may call for soaking with hot water and detergent or using a dishwasher. Follow the care instructions for your chosen product.
How often should I clean a grease filter?
Cleaning frequency depends on how often you cook and how much grease your cooking produces. Check the filter periodically and clean it when grease is visible or buildup is affecting the mesh. Follow the manufacturer’s care guidance.
Can I replace a BPS1FA30 filter with an S99010430-002 filter?
Not based on these listed dimensions. The BPS1FA30 options measure about 11-3/4 by 14-1/4 inches, while the S99010430-002 options measure 13-7/8 by 15-3/4 inches. Use the part number and measurements required by your hood.
Does a grease filter remove cooking odors?
A grease filter is primarily designed to capture grease from the air passing through the hood. These product details do not establish that the filters remove all cooking odors. Your hood’s ventilation setup also affects how cooking air is handled.
Final Recommendation
The right choice depends first on fit. For select Broan and Sears hoods that use BPS1FA30, compare the Fetechmate and oneket two-packs. For the smaller 8.75-by-7.5-inch size used by select Whirlpool, KitchenAid, and Jenn-Air models, consider the HUTUDAN four-pack. If your hood calls for S99010430-002, compare the ENKTIK pull-tab design with Kamrexi’s reinforced frame. In every case, verify your model number and filter dimensions before ordering.