Choosing a keg rack for a walk-in cooler is about more than fitting kegs onto a shelf. You’ll want to match the rack’s footprint, height, shelf layout, and weight capacity to your cooler and the kegs you store. These five options range from compact single-level stands to tall, multi-shelf racks, with differences in material and keg capacity that can help narrow your choice.
Quick Comparison
| Keg rack | Dimensions | Capacity and layout | Material |
|---|---|---|---|
| Zedfire 2-Level Keg Rack | 18 x 60 x 64 in. | 2 levels; 1,600 lb total, 800 lb per shelf | Green epoxy-coated rack |
| Glownary 3-Keg Rack | 18 x 60 x 34 in. | 3 half-size kegs; 800 lb per shelf | Green epoxy-coated rack |
| Glownary Aluminum 3-Shelf Rack | 20 x 60 x 76 in. | Up to 6 full-size kegs; 1,015 lb total | Aluminum |
| Glownary 48 x 24 Single-Shelf Rack | 48 x 24 x 34 in. | 3 half-size kegs; 800 lb capacity | Green epoxy-coated metal |
| Glownary 4-Keg Two-Shelf Rack | 24 x 36 x 64 in. | 4 half-size kegs; 1,600 lb total, 800 lb per shelf | Epoxy-coated steel wire |
Our Picks: Best Keg Racks For Walk In Coolers reviews
1. Zedfire 2-Level Rack: A Tall, Narrow Storage Option
The Zedfire rack uses a two-level layout in a relatively narrow 18-inch-wide footprint. Its 60-inch length and 64-inch height make it a space-conscious choice when floor area is limited but your cooler has enough vertical clearance. The product is listed as NSF and has a green epoxy finish.
Its stated capacity is 1,600 pounds total, with 800 pounds per shelf. A three-sided frame is intended to help keep the rack stable, while removable wire mats allow airflow and can be taken out for cleaning. Assembly uses a split-sleeve system and is described as tool-free.
One detail to check before buying is your actual keg arrangement: the supplied specifications give the rack’s dimensions and load limits but do not state a specific keg count. The two tiers may make better use of vertical space than a single shelf, but you’ll need to confirm the shelf spacing works for your kegs and access needs.
Pros:
- Two levels make use of vertical cooler space.
- 1,600-pound total capacity, with 800 pounds per shelf.
- Removable wire mats support airflow and easier cleaning.
- Tool-free assembly is described in the product details.
Cons:
- The listed specifications do not give a specific keg count.
- Its 64-inch height requires enough overhead clearance.
Verdict: Choose the Zedfire if you want a tall, narrow two-tier rack and its dimensions and shelf spacing suit your cooler.
2. Glownary 3-Keg Rack: A Low-Profile Choice for Half-Size Kegs
This 18-by-60-inch rack is 34 inches high and is designed to hold three half-size kegs on one shelf. Its lower profile can be useful when you want to keep storage accessible without stacking kegs vertically. The green epoxy coating and NSF listing are suited to a commercial cooler or bar setting.
The shelf has a stated capacity of 800 pounds. A three-sided frame adds support, and the removable wire mat is designed to promote airflow and simplify cleaning. It ships unassembled and uses split sleeves, which also allow shelf-height adjustment according to the product description.
Compared with the taller two-level options, this rack is simpler and easier to assess for a single row of kegs, but it does not offer a second storage level. Measure the full 60-inch length and confirm the rack can be positioned where you need it before ordering.
Pros:
- Designed to accommodate three half-size kegs.
- 800-pound shelf capacity.
- Removable wire mat supports airflow and cleaning.
- Adjustable shelf height and split-sleeve assembly.
Cons:
- Single-shelf design offers less vertical storage than a two-tier rack.
- Ships unassembled.
Verdict: This is a practical pick if you need one low-profile shelf specifically sized for three half-size kegs.
3. Glownary Aluminum Rack: Tall Storage for Full-Size Kegs
For a cooler that needs to store full-size kegs, this Glownary model has a three-shelf layout and a stated capacity of up to six full-size kegs. It measures 20 inches wide by 60 inches long by 76 inches high, so it offers substantial vertical storage but needs more overhead clearance than the other options here.
The frame is aluminum, with round support posts, and the shelves are adjustable to accommodate different keg sizes. Its total listed weight capacity is 1,015 pounds. The bottom shelves are described as supporting up to 500 pounds each, while the top shelf is rated for 15 pounds per square foot—an important difference if you plan to store supplies above the kegs.
This rack is NSF listed and ships knocked down for assembly. Its size and shelf-load details make it more specialized than the compact single-level racks. Before choosing it, check the height of your cooler and the intended load on each shelf rather than relying on the total capacity alone.
Pros:
- Designed to hold up to six full-size kegs.
- Three adjustable shelves allow different storage arrangements.
- Aluminum construction and NSF listing.
- Provides a stated total capacity of 1,015 pounds.
Cons:
- At 76 inches tall, it needs substantial vertical clearance.
- The top shelf has a much lower stated load limit than the bottom shelves.
Verdict: Pick this model when you need tall, adjustable storage for full-size kegs and can work within its shelf-specific load limits.
4. Glownary 48 x 24 Rack: A Wide Single Shelf for Three Half Kegs
This stationary rack has a wider, more compact footprint than the 18-by-60-inch models. At 48 inches long, 24 inches wide, and 34 inches high, it is designed for three half-size kegs on one shelf. That layout may suit a cooler where a short, broad rack fits better than a long narrow one.
The rack is made of epoxy-coated metal and has a green vented shelf. It is NSF certified for commercial use and has an 800-pound capacity. The stationary design keeps the configuration straightforward, but it also means this is not a rack to choose if you need to roll storage out of position.
Assembly is required. The product details do not describe adjustable shelving or removable wire mats, so this rack is a simpler alternative to the adjustable and removable-mat designs elsewhere in this guide. Check its 48-by-24-inch footprint against your aisle and door clearances.
Pros:
- Designed for three half-size kegs on one shelf.
- Wide, relatively low 48-by-24-inch footprint.
- 800-pound capacity and NSF certification.
- Vented shelf and epoxy-coated metal construction.
Cons:
- Stationary design does not offer rolling mobility.
- Assembly is required.
Verdict: Consider this rack if you want a certified, single-level stand for three half-size kegs and have room for its wider footprint.
5. Glownary 4-Keg Rack: Two Levels in a Compact Footprint
This Glownary rack is designed to hold four half-size kegs across two shelves. Its 24-by-36-inch footprint is shorter than the 60-inch-long racks, which may help in a cooler where floor space is limited. At 64 inches tall, it trades a smaller footprint for vertical storage.
The rack uses epoxy-coated steel wire with a vented, open design, and it is NSF certified. Each shelf is listed with an 800-pound capacity, for 1,600 pounds total. It is a stationary unit without casters, and the supplied details describe assembly as easy.
Compared with the Zedfire, this model has a stated keg count and is sized for half-size kegs, while the Zedfire’s capacity is given without a keg count. The Glownary’s shorter length could be useful in a tighter layout, but its 24-inch width and 64-inch height still need to be checked against the available space.
Pros:
- Designed for four half-size kegs on two shelves.
- 1,600-pound total capacity, with 800 pounds per shelf.
- Compact 24-by-36-inch footprint compared with longer models.
- NSF-certified epoxy-coated steel wire construction.
Cons:
- At 64 inches high, it needs adequate overhead clearance.
- Stationary design has no casters.
Verdict: This is a strong option if you need two-level storage for four half-size kegs in a shorter floor footprint.
How to Choose a Keg Rack for a Walk-In Cooler
Measure the Cooler and the Route to Its Final Position
Measure the intended floor area, overhead clearance, and nearby aisle space before choosing a rack. Compare those measurements with the rack’s listed width, length, and height. Also consider whether the assembled rack can pass through the cooler door and fit around other equipment. A tall rack can save floor space, but only if your cooler has enough vertical clearance.
Match the Rack to Your Keg Size and Count
Check whether the product is designed for half-size kegs, full-size kegs, or a stated number of kegs. Capacity claims are not interchangeable: the aluminum model is listed for up to six full-size kegs, while several other racks specify half-size kegs. If a product listing does not state a keg count, confirm that the shelf layout and dimensions suit your particular setup.
Read Shelf Limits, Not Just Total Capacity
A rack’s total weight limit does not tell the whole story. Look at the capacity for each shelf and follow the lower limit where one is specified. For example, the aluminum rack’s bottom shelves have higher stated limits than its top shelf. Plan how the weight will be distributed, and do not assume that every shelf can hold the same load.
Choose One Level or Multiple Levels
A single-level rack can provide direct access to kegs without stacking storage vertically. A two- or three-shelf model may make better use of a tight floor plan, but it needs enough ceiling clearance and workable shelf spacing. Consider how you will place and remove kegs from each level, not just how many fit on paper.
Consider Material, Finish, and Cleaning
These options include aluminum and epoxy-coated metal or steel wire. Some have removable wire mats, while others describe a vented or open shelf. Removable mats may make cleaning easier, and open wire designs allow airflow through the shelf. Check the product details for the finish and cleaning features that fit your cooler’s conditions and maintenance routine.
Confirm Certification and Assembly Details
If commercial certification matters for your operation, check the specific product’s NSF status rather than assuming all keg racks have it. Also note whether the rack ships unassembled, requires assembly, or is described as tool-free. Assembly style can affect how quickly you can put the rack into service and whether you need to plan space for setup.
Think About Mobility and Access
The listed models are stationary, and the Glownary 4-keg rack is specifically described as having no casters. If you need to move a loaded rack, confirm that the model is designed for that use; do not assume a stationary stand can be safely rolled. Leave enough clearance around the rack to access connections and handle kegs as needed.
Frequently Asked Questions
What should I measure before buying a keg rack?
Measure the floor area where the rack will sit, the cooler’s ceiling height, and the available path through the door. Then compare those measurements with the product’s listed dimensions and consider the space needed to access the kegs.
Which rack in this guide is designed for full-size kegs?
The Glownary aluminum rack is listed for up to six full-size kegs. The other racks specify half-size kegs or do not provide a keg count in the supplied product details.
Does a 1,600-pound total capacity mean each shelf holds 1,600 pounds?
No. For the Zedfire and Glownary 4-keg racks, the listed capacity is 1,600 pounds total, with 800 pounds per shelf. Always follow the stated limit for each shelf rather than treating the total as a per-shelf rating.
Are all of these racks adjustable?
No. The Glownary 3-keg rack is described as having adjustable shelf height, and the aluminum rack has adjustable shelves. The supplied details for the other models do not state that their shelves are adjustable.
Do these racks have wheels?
The listed products are described as stationary racks, and the Glownary 4-keg model specifically has no casters. Check the product details if mobility is important; these specifications do not describe a wheeled option.
Which rack has removable wire mats?
The Zedfire 2-level rack and Glownary 3-keg rack specifically list removable wire mats. The other products describe vented or open shelves but do not state that their shelf surfaces are removable.
Is NSF certification listed for every option?
The supplied product information identifies the Zedfire as NSF, the Glownary 3-keg rack as NSF listed, the aluminum rack as NSF listed, and both other Glownary models as NSF certified. Check the individual listing for current product details before making a purchasing decision.
Final Recommendation
For two-level storage of four half-size kegs in a shorter floor footprint, the Glownary 4-keg rack is the clearest match among these options. Choose the Glownary aluminum model if you need a rack specified for full-size kegs, and consider the single-shelf Glownary models if you prefer a lower, more direct layout. Before ordering, confirm the fit, keg size, shelf limits, and certification requirements for your cooler.