Your Modern LivingPractical guides for everyday living

Furniture & Decor

Best Lighting For Above Kitchen Cabinets: Top Picks Compared

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Guide at a glance

  • 5products compared
  • 10minute read
  • Side-by-side comparison table
  • Who each pick suits best
  • What to check before you buy

Lighting above kitchen cabinets can add a soft glow to the ceiling and make a kitchen feel more finished. For this effect, look for slim, linkable lights with a dimmer and enough cable to reach a nearby outlet. Some products here are designed mainly for under-cabinet use, so check the maker’s installation instructions and plan how you’ll secure and aim each light before mounting it above your cabinets.

Among these options, the Litever six-light kits offer the clearest fit for above-cabinet layouts because their product descriptions specifically mention that use. The other picks may suit a smaller or more flexible setup, but compare their mounting methods, controls, and light color to your space.

ProductKey featuresBest for
Maylit 3-Piece 12-Inch Plug-In Lights6000K daylight white, touch dimmer, 1,200 lumens totalA small, dimmable setup
Litever Six-Light 12-Inch Kit5000K, 1,920 lumens, included dimmer, modular designBright, extendable above-cabinet lighting
Litever Three-Bar Lighting Kit20W, 1,000 lumens, inline rotary dimmerA simpler three-bar arrangement
Maylit 14-Inch LED Light Bar6000K daylight light, inline switch, linkable barsA straightforward, extendable light bar
Litever Six-Piece 12-Inch Kit31W, rotary dimmer, plug-in or hardwire optionsA larger, flexible lighting layout

Our Picks: Best Lighting For Above Kitchen Cabinets reviews

Maylit 3-Piece 12-Inch Lights: A Compact Dimmable Set

This Maylit kit includes three 12-inch light bars, a plug-in power supply, and a touch dimmer. The maker lists a combined output of 1,200 lumens and a 6000K daylight-white color. Its slim profile is intended to stay out of sight under a cabinet, which may also help it sit discreetly on top of cabinets if the surface and mounting setup are suitable.

The touch control lets you switch the lights on or off with a short touch and adjust brightness with a longer touch. That makes it easier to tune the glow for evening use than a simple on/off bar. Keep in mind that daylight-white light can look crisp and bright; it may feel less cozy than a warmer color in a kitchen used mainly for relaxing.

The kit includes both adhesive tape and screws. For above-cabinet use, choose the mounting method that securely suits the cabinet surface, and route the power cable so it stays neat and does not hang into view. The three-bar layout is best for a short run or a smaller area rather than a long stretch of cabinetry.

Pros:

  • Three 12-inch bars provide a compact setup.
  • Touch control includes dimming and on/off operation.
  • Offers adhesive and screw mounting options.
  • Listed output is 1,200 lumens across the set.

Cons:

  • Its 6000K daylight color may look stark in a cozy kitchen.
  • Designed primarily for under-cabinet use, so plan above-cabinet placement carefully.

Verdict: Choose this Maylit set if you want a small, dimmable arrangement and can securely adapt its slim bars to your cabinet tops.

Litever Six-Light 12-Inch Kit: Bright and Expandable

This Litever kit has six 12-inch bars, a power adapter, and an included dimmer. The product description lists 28W and 1,920 lumens, with a 5000K light color. It also specifically names above-kitchen-cabinet lighting as a possible use, making it one of the more direct matches for an uplighting project in this group.

The modular design is a useful feature when cabinets span a longer wall or have gaps and corners. The kit can be arranged with add-on bars, extension cables, splitters, or a motion-activated sensor switch, according to the product description. The included dimmer adjusts brightness from 10% to 100%; it is not described as compatible with existing AC wall dimmers.

At its brightest, the listed output may be more than you need for a gentle ceiling glow, so the dimmer is important. A 5000K color is cooler than warm-white lighting, and the finished look will depend on how high your cabinets sit and how much light reflects off the ceiling. Plan the bar spacing and cable route before installation.

Pros:

  • Six bars provide more coverage than the three-light kits.
  • Above-cabinet lighting is specifically listed as a use.
  • Includes a dimmer and supports an extendable layout.
  • Listed output is 1,920 lumens.

Cons:

  • The dimmer is not compatible with existing AC wall dimmers.
  • Its 5000K color may look cool compared with warmer room lighting.

Verdict: This is a strong choice if you want a bright, expandable kit that is specifically described for above-cabinet lighting.

Litever Three-Bar Kit: A Basic Dimmable Option

This Litever kit uses three light bars and includes a power supply and rotary inline dimmer. Its listed output is 20W and 1,000 lumens. The product description calls the light daylight white and describes the illumination as even, without visible LED dots or glare.

Mounting clips, screws, adhesive pads, and wire clips are included, giving you a few ways to secure and organize the installation. The rotary dimmer offers stepless brightness adjustment, which is helpful when you want a subdued glow above the cabinets rather than full task lighting. The product is presented mainly as under-cabinet lighting, so check the instructions and mounting fit before using it above cabinets.

Three bars make this a more limited layout than either six-bar Litever kit. It can suit a shorter run, a small kitchen, or a focused section of cabinetry, but may not cover a long wall evenly. The product information does not list a specific color temperature, so check the listing if matching the light color to other fixtures is important to you.

Pros:

  • Three bars and a 1,000-lumen listed output suit a modest layout.
  • Includes a rotary inline dimmer with stepless adjustment.
  • Mounting and wire-management accessories are included.
  • Plug-in design does not require professional electrical work for a standard setup.

Cons:

  • The product is primarily described for under-cabinet use.
  • Its specific color temperature is not listed in the supplied product information.

Verdict: Consider this kit for a short run where you value a simple inline dimmer and can confirm that the bars suit your above-cabinet installation.

Maylit 14-Inch Light Bar: A Simple Linkable Setup

This Maylit option is a 14-inch plug-in LED light bar with an inline on/off switch. It uses 6000K daylight-white light and supports two connection methods: a 4.9-foot connection cable for wider spacing or a direct connector for a closer fit. The linkable design can help you build a run that matches your cabinet layout.

Adhesive pads and mounting clips with screws are included. For use above cabinets, the bar’s slim design may help keep it less visible, but the product is marketed mainly for under-cabinet lighting. Check that its mounting method works on your cabinet tops and that the light points where you want it before fixing it in place.

This bar has a basic inline switch rather than a listed dimmer. That makes it a straightforward choice if you want simple on/off control, but less flexible if you need to lower the brightness for evening ambience. The 6000K color is also on the cooler side, which may stand out if your kitchen uses warmer bulbs.

Pros:

  • 14-inch bar offers more length per light than the 12-inch options.
  • Linkable connections allow closer or wider spacing.
  • Includes adhesive pads and screw-mounted clips.
  • Inline switch provides simple on/off control.

Cons:

  • No dimming feature is listed.
  • Its 6000K color may look cool next to warm-white lights.

Verdict: Pick this Maylit bar if you want a simple, linkable light and do not need a dimmer.

Litever Six-Piece Kit: A Flexible Choice for Longer Runs

This Litever kit includes six 12-inch bars and is listed at 31W. The product description identifies both plug-in and hardwire use, and it specifically mentions above-cabinet lighting as one possible application. Its modular design and included extension cords, wire clips, mounting clips, and adhesive pads provide options for arranging the lights along a longer run.

An included rotary dimmer adjusts the lights from 0% to 100%. It is intended to work with the supplied dimmer rather than an existing wall dimmer. The product description also says add-on bars, extension cables, splitters, and a motion-activated sensor switch can be added, which may be useful if you want to change or expand the layout later.

This is the largest listed kit in the selection, so measure the cabinet run and plan how many bars you actually need before choosing it. The product description does not provide a lumen figure or color temperature in the supplied information, so compare those details on the listing if brightness and matching a particular light color are key priorities.

Pros:

  • Six 12-inch bars can cover a longer stretch of cabinets.
  • Above-cabinet lighting is specifically listed as a use.
  • Includes a rotary dimmer and mounting accessories.
  • Product description offers plug-in or hardwire installation options.

Cons:

  • The dimmer is not compatible with existing wall dimmers.
  • The supplied product information does not list lumens or color temperature.

Verdict: Choose this Litever set if you want six bars, dimming, and the option to use a plug-in or hardwire setup according to the installation instructions.

How to Choose Lighting for Above Kitchen Cabinets

Check That the Light Is Suitable for Above-Cabinet Use

Not every under-cabinet bar is designed to sit on top of a cabinet. Look for a product description that names above-cabinet lighting, then check the installation instructions for placement and mounting guidance. If the maker describes it mainly for under-cabinet use, confirm that the bar can be securely installed and aimed as needed before you buy.

Measure the Cabinet Run and Plan Bar Spacing

Measure the length of the cabinet tops and note any corners, gaps, or changes in depth. Compare those measurements with the number and length of the bars, and account for connection cables between sections. A longer kit can cover more space, but the best layout is one that places light evenly without leaving large dark gaps.

Choose a Light Color That Fits Your Kitchen

The listed color temperatures in this group range from 5000K to 6000K, both of which create a cooler, daylight-like look. That can suit a crisp, bright kitchen, but may contrast with warmer ceiling lights. If the product information does not list a color temperature, check the product listing before ordering if matching your existing lighting matters.

Decide How Much Dimming You Need

A dimmer gives you more control over the glow, especially when the kitchen is used in the evening. These kits use touch or inline dimmers, and their descriptions do not indicate that they work with existing AC wall dimmers. If you need a dimmer, check whether it is included and how it is controlled rather than assuming a wall switch will handle it.

Plan Power and Cable Management

Look at where the outlet is and how the power cable will reach it without hanging down into view. Modular kits with extension cables or splitters can make it easier to route power around a larger layout. For any hardwire installation, follow the product instructions and use a qualified professional if you are not comfortable with electrical work.

Compare Mounting Methods

Adhesive pads can make installation simple, while screws and mounting clips offer another way to secure a light. Cabinet-top surfaces vary, so consider whether the included mounting method is appropriate for your material and the placement you have in mind. Do not rely on an attachment method that does not hold the bars securely.

FAQs

Can under-cabinet lights be used above kitchen cabinets?

Some can, but check the product description and installation instructions first. Two Litever kits in this list specifically name above-cabinet lighting as a possible use. For other models, confirm that the bars can be safely and securely mounted in that position.

What color temperature works well for above-cabinet lighting?

It depends on the mood and the other lights in your kitchen. The products here list 5000K or 6000K daylight-white light, which tends to look cool and crisp. If you prefer a warmer glow, look for a product that lists a warmer color temperature.

Do I need a dimmer for above-cabinet lights?

A dimmer is useful if you want to adjust the ceiling glow for different times of day. If you prefer simple on/off control, a basic switch may be enough. Check whether the dimmer is included and whether it works with the controls you already have.

Are light bars or light strips better for this setup?

These picks are rigid light bars rather than flexible strips. Bars can be useful when you want separate sections that connect with cables or direct connectors. Measure your space and review the included connection options to see whether the kit can fit your cabinet layout.

How many lights do I need above my cabinets?

There is no single number for every kitchen. The length of the cabinet run, the spacing between bars, and the brightness you want all matter. Measure first, then compare the kit’s number of bars and their length with your available space.

Can I connect these lights to an existing wall dimmer?

Do not assume you can. The two six-light Litever product descriptions say their included dimmers are not compatible with existing wall dimmers. Check the exact product instructions and use the dimmer supplied with the kit unless compatibility is clearly confirmed.

Final Recommendation

For a dedicated above-cabinet layout, start with the Litever six-light 12-inch kit that specifically lists above-cabinet use and includes a dimmer. The six-piece Litever kit is another flexible choice if its plug-in or hardwire options suit your setup. For a smaller area, the Maylit three-piece set offers touch dimming, while the 14-inch Maylit bar is a simpler option if you do not need brightness control. Measure your cabinets, check the installation guidance, and plan the cable route before choosing.

Author

  • Emily

    Emily is the editor of YourModernLiving, where she helps readers make informed decisions about home, kitchen, family, and everyday products. She focuses on researching product features, comparing available options, and creating practical buying guides to help readers find products that suit their needs, preferences, and budgets.

Leave a Comment