A paper towel holder near your grill keeps towels close for quick cleanups without taking up counter space. Magnetic models are easy to move, but they only work on surfaces the magnet can grip—and a grill cart’s finish or metal type can affect fit. These five options offer different roll capacities, designs, and stated holding strengths, so check your grill setup before choosing.
Quick Comparison
| Product | Standout feature | Best for |
|---|---|---|
| niffgaff Heavy-Duty Magnetic Holder | 12.4-inch fixed bar; jumbo-roll fit | Large rolls and a rigid design |
| EASTTOWEST Magnetic Towel Bar | Carbon-steel construction; horizontal or vertical mounting | Buyers who want a simple metal holder |
| Mystozer Adjustable Magnetic Holder | Adjustable two-piece design | Switching between standard and jumbo rolls |
| pickpiff Heavy-Duty Magnetic Holder | 12.4-inch fixed aluminum rod | Jumbo rolls and a stated higher vertical capacity |
| niffgaff Holder with Dual Retention | Inward-angled arm and enlarged end cap | Keeping a roll secure on a grill cart |
Our Picks: Best Paper Towel Holder For Grill reviews
1. niffgaff Heavy-Duty Holder: A Fixed Bar for Jumbo Rolls
This holder uses a fixed 12.4-inch bar designed to fit jumbo paper towel rolls. Its rigid, non-rotating structure is intended to keep the roll steady while you pull a sheet—useful when you want to tear towels with one hand while tending to food or grill tools with the other.
The reinforced base and rust-resistant bar make it a practical option for a grill station, garage, or RV, as long as you have a compatible magnetic metal surface. The stated holding capacity is up to 4.4 pounds horizontally and 8.8 pounds vertically. Those figures apply to different mounting orientations, so they should not be treated as a single universal limit.
Its main trade-off is surface compatibility. The product is listed for iron, carbon steel, cast iron, and magnetic stainless steel types 430, 410, and 420. It is not suitable for aluminum or nonmagnetic stainless steel such as 304. Check the grill cart itself rather than assuming its exterior will hold a magnet.
Pros:
- Long bar accommodates jumbo rolls.
- Fixed design is intended to reduce wobbling and sagging.
- Can be mounted horizontally or vertically.
- Does not require drilling or adhesive on a suitable metal surface.
Cons:
- Will not attach to nonmagnetic materials or incompatible stainless steel.
- The fixed bar may be less flexible than an adjustable holder.
Verdict: Choose this model if your grill station has a compatible steel surface and you want a rigid bar with room for a jumbo roll.
2. EASTTOWEST Magnetic Towel Bar: A Straightforward Carbon-Steel Option
The EASTTOWEST is a 12-inch carbon-steel bar with a matte-black finish. It is described as fitting regular, large, and jumbo paper towel rolls, and it can also be used as a bar for a towel or dishcloth. Its simple shape suits a grill cart or toolbox where an uncomplicated hanging spot is more useful than extra adjustment features.
The holder can be placed horizontally or vertically and is listed to support up to 6 pounds. Its magnet is designed for ferrous surfaces, but the product description specifically says it is not suitable for stainless steel. That limitation matters because some grill carts and appliances use stainless steel that may not attract a magnet.
The listing mentions a non-scratch layer for detaching the holder, but it does not provide a detailed surface-compatibility list or a weather-resistance rating. If you plan to leave it outdoors, consider how your grill station is exposed to moisture and store or remove the holder as needed.
Pros:
- Carbon-steel construction with a matte-black finish.
- Fits common roll sizes, including jumbo rolls.
- Mounts horizontally or vertically.
- Can hold a dishcloth or towel as well as paper towels.
Cons:
- The listing excludes stainless-steel surfaces.
- No weather-resistance rating is provided.
Verdict: This is a basic, versatile choice for a compatible ferrous-metal grill cart, but check the surface carefully if your cart is stainless steel.
3. Mystozer Adjustable Holder: Flexible Fit for Different Roll Sizes
Unlike the fixed bars in this lineup, the Mystozer uses an adjustable two-piece design. It is intended to fit both standard and jumbo rolls, making it a useful option if you change roll sizes or want to reposition the holder for different setups.
The holder is made from ABS with a matte-black finish and is listed to support up to 5 pounds. Its open-ended design allows for quick roll replacement, and the description says it is designed for smooth one-handed tearing. It can attach to suitable steel surfaces without drilling or adhesive, so you can move it between a grill cart, RV, or garage cabinet.
The adjustable construction offers more flexibility than a fixed rod, though the listed material differs from the metal bars used by several other picks. The product description does not specify a detailed list of compatible metal types or give a weather-resistance rating. Confirm that your grill’s mounting surface works with the magnet, and avoid placing the holder near direct heat.
Pros:
- Adjustable design accommodates standard and jumbo rolls.
- Can be repositioned without drilling or adhesive.
- Open-ended design makes roll replacement straightforward.
- Listed for use in grill areas, RVs, and other steel-surface locations.
Cons:
- The description does not specify exact compatible steel types.
- No outdoor weather-resistance rating is provided.
Verdict: Pick the Mystozer if adjustability is your priority and you can confirm that its magnet will hold on your grill station.
4. pickpiff Heavy-Duty Holder: A Long Fixed Rod with a Higher Vertical Rating
The pickpiff combines a sturdy metal base with a 12.4-inch aluminum rod. Its fixed design is intended to limit bending, sagging, and wobbling, while the long bar provides space for standard or jumbo rolls. You can use it horizontally for paper towels or vertically as a towel bar.
The product is listed to support up to 6 pounds horizontally and 12 pounds vertically on suitable, flat magnetic metal surfaces. Like the other holders, it is not a universal fit for every grill: confirm the cart surface is magnetic and reasonably flat before buying. Its magnet-based installation avoids drilling and adhesive.
This is a strong feature set for someone who wants a fixed bar rather than an adjustable holder. However, its stated load figures do not guarantee performance on every surface or in every position. The listing also does not provide a weather-resistance rating, so regular exposure to rain or direct heat should be considered when choosing where to mount it.
Pros:
- Long rod is designed to fit jumbo rolls.
- Metal base and aluminum rod form a fixed-bar design.
- Stated capacities distinguish horizontal and vertical mounting.
- Can be repositioned without tools on a suitable magnetic surface.
Cons:
- Requires a suitable flat magnetic metal surface.
- No weather-resistance rating is stated.
Verdict: Consider the pickpiff if you want a fixed jumbo-roll holder and its surface and orientation-specific capacity suit your setup.
5. niffgaff Holder with Dual Retention: Helps Keep the Roll in Place
This niffgaff model has an extended arm with a 5-degree inward angle and an enlarged end cap, a design intended to help keep the roll from sliding off. Its 12.2-inch bar is listed as fitting a wide range of roll sizes, including extra-large jumbo rolls. That extra retention can be useful when pulling towels near a busy grill.
The holder has a rust-resistant aluminum bar, a powder-coated finish, and a reinforced metal rod. Its stated capacity is up to 5 pounds horizontally and 10 pounds vertically. Those numbers depend on orientation, and the product specifies compatible surfaces such as iron, carbon steel, and certain magnetic stainless steel types. It is not intended for aluminum or nonmagnetic stainless steel such as 304.
The angled arm and end cap offer a different approach from the simple fixed bars in this group. The trade-off is that a roll may take a little more attention to slide onto the arm than on a fully open-ended design. As with the other options, the listing does not give a weather-resistance rating, so magnetic attachment and finish should not be taken as proof that it is suitable for constant outdoor exposure.
Pros:
- Angled arm and end cap are designed to retain the roll.
- Fits oversized rolls, according to the product description.
- Rust-resistant aluminum bar and powder-coated finish.
- Lists compatible magnetic surface types.
Cons:
- Will not work on nonmagnetic surfaces such as aluminum or stainless steel 304.
- No weather-resistance rating is stated.
Verdict: Choose this model if keeping the roll securely on the bar is more important to you than having a completely open-ended design.
How to Choose a Paper Towel Holder for Your Grill
Check the Grill Cart Surface First
A magnetic holder is only useful if the magnet can grip the spot where you plan to mount it. A quick magnet check can help you assess the surface, but also review the product’s compatibility notes: some models exclude certain stainless steel types, and aluminum will not hold a magnet. Curved or uneven surfaces may also be a poor match for a holder designed for a flat area.
Match the Bar to Your Paper Towel Roll
Jumbo rolls need enough bar length and clearance to turn freely. The fixed bars in this selection are about 12 inches long, while the Mystozer uses an adjustable design. If you buy oversized rolls, check the stated fit and the available space around the mounting spot so the roll does not press against a shelf, lid, or grill handle.
Choose Fixed or Adjustable Construction
A fixed bar offers a simple setup with fewer moving parts. An adjustable holder can be more adaptable if you use different roll widths or move it between locations. Consider how often you change rolls and whether you value a firm, fixed shape or a more flexible fit.
Consider How the Roll Stays on the Bar
Open-ended bars make it easy to replace a roll, while an end cap or inward-angled arm is intended to help keep the roll from slipping off. If you often pull towels quickly, think about whether retention or easy roll changes matter more for your routine.
Read Capacity Claims in Context
Some listings give different capacity figures for horizontal and vertical mounting. Use the number for the position you plan to use, and remember that stated limits depend on a suitable magnetic surface. Avoid treating a holder’s capacity as a measure of how well it will grip every grill finish.
Think About Heat and Outdoor Exposure
A product listing may mention grills without giving a weather-resistance rating. Mount the holder away from direct heat, and consider whether the grill cart is exposed to rain or moisture. When in doubt, remove the holder or store it in a sheltered spot when the grill is not in use.
Plan the Mounting Position
Choose a spot that keeps towels within reach without interfering with the grill lid, burners, prep space, or movement around the cart. A vertical position can save horizontal space, while a horizontal position may make the roll easier to pull. Test the placement before loading the holder with a full roll.
Frequently Asked Questions
Will a magnetic paper towel holder work on any grill?
No. It needs a compatible magnetic metal surface. Aluminum and some stainless steel types are not magnetic, so check the holder’s surface notes and test the intended spot before relying on it.
Can I mount the holder near the grill burners?
Keep it away from direct heat. The supplied product descriptions do not give a safe distance or a heat rating, so choose a cooler area of the grill cart and follow your grill’s safety guidance.
Do these holders fit jumbo paper towel rolls?
Several are specifically described as fitting jumbo rolls, including the fixed-bar options from niffgaff and pickpiff. The Mystozer is adjustable for standard and jumbo sizes. Check the dimensions and fit notes for the model you choose.
Can I attach a magnetic holder to stainless steel?
It depends on the type of stainless steel. Some magnetic grades are listed as compatible by certain products, while other grades, including 304 in two listings, are excluded. Test the surface and follow the specific product’s compatibility information.
Is a fixed or adjustable paper towel holder better for grilling?
A fixed bar is a straightforward choice if you use one roll size and want a rigid design. An adjustable model may make more sense if you switch between standard and jumbo rolls. Your preferred balance of stability and flexibility should guide the choice.
Are these holders weatherproof?
The supplied descriptions do not provide a weatherproof rating for these products. Some mention rust-resistant materials or grill use, but that does not establish suitability for continuous exposure to rain. Consider storing the holder under cover when it is not in use.
Final Recommendation
For a compatible magnetic grill cart and a jumbo roll, the niffgaff Heavy-Duty Magnetic Holder is a well-rounded pick thanks to its long fixed bar and rigid design. Choose the Mystozer if adjustable fit matters more, or the niffgaff dual-retention model if keeping the roll on the arm is your priority. Before ordering any of them, confirm your grill’s surface is magnetic and plan a mounting spot away from direct heat.