A kitchen sink splash guard can help keep water off the wall and countertop, but the right style depends on your sink and how you can mount a shield beside it. These three options range from adhesive-mounted stainless-steel panels to a larger wraparound guard. Compare their sizes and installation methods before choosing one for your kitchen.
Quick Comparison
| Product | Size and design | Installation | Best for |
|---|---|---|---|
| Lewtemi 2-Piece Stainless Steel Splash Guards | Two panels, about 14 x 10 inches each | Double-sided adhesive tape included | Those who want a tool-free wall-mounted option |
| Fumete 3-Sided Stainless Steel Splash Guard | 15 x 19.5 x 8 inches; wraparound design | Screw-on attachment; screws not included | 10 x 14-inch drop-in sinks needing coverage on three sides |
| Therwen 2-Piece Stainless Steel Side Splash Guards | Two panels, 17 x 12 inches each | Mounting screws included | Those who want larger side panels with screw mounting |
Our Picks: Best Kitchen Sink Splash Guard For Wall reviews
Lewtemi: Adhesive-Mounted Guards for a Simple Setup
The Lewtemi set includes two stainless-steel panels, each about 14 x 10 inches, and a 3-meter roll of double-sided adhesive tape. Its wall-mount approach can suit a sink area where you want splash coverage without drilling or using tools.
The panels are made from 304 stainless steel and have a smooth edge, according to the product details. The non-porous surface is described as easy to wipe clean and sanitize. At about 18 gauge, these panels are a lighter option than the listed 16-gauge Fumete guard.
Adhesive mounting is convenient, but it makes surface preparation and placement important. Check that your wall or other mounting surface is suitable for the tape, and plan the position before attaching the panels. The set’s dimensions may not provide as much coverage as the larger Therwen panels or the Fumete wraparound design.
Pros:
- Two panels provide flexibility for a sink’s sides.
- Double-sided adhesive tape is included.
- 304 stainless steel is suited to a wet kitchen environment.
- Smooth, non-porous surfaces are designed for easy cleaning.
Cons:
- Adhesive installation may not suit every wall surface.
- Smaller panels may offer less coverage than the other options.
Verdict: Choose Lewtemi if you want two compact stainless-steel panels and prefer an adhesive installation over mounting with screws.
Fumete: Three-Sided Coverage for a Matching Drop-In Sink
Unlike a pair of flat panels, the Fumete guard is designed to wrap around the back and both sides of a sink. Its listed dimensions are 15 x 19.5 x 8 inches, and the product is specified for a 10 x 14-inch drop-in sink. Matching those measurements is especially important with this more fitted design.
The guard is made from 16-gauge, 1.5 mm 304 stainless steel. Its heavier listed gauge sets it apart from the two-panel alternatives. The product description says it attaches with screws, which are not included, and that the guard can be removed for cleaning and folded down when needed.
This design may suit a sink that regularly sends water toward the counter or nearby walls on multiple sides. Its size and screw-on installation make it less flexible than the adhesive-mounted Lewtemi panels, though. Confirm your sink dimensions and mounting setup before buying; the listed fit is for a specific drop-in size, not every sink configuration.
Pros:
- Wraparound design covers the back and both sides.
- Made from 16-gauge 304 stainless steel.
- Designed to detach for cleaning.
- Listed for a 10 x 14-inch drop-in sink.
Cons:
- Mounting screws are not included.
- The specified sink size may limit compatibility.
Verdict: The Fumete is the most specialized choice here: consider it if your drop-in sink matches the listed dimensions and you want three-sided coverage.
Therwen: Larger Side Panels with Screw Mounting
Therwen’s set contains two 17 x 12-inch side splash guards made from 304 stainless steel. The larger panels offer more height and width than the Lewtemi set, which may be useful if you want a broader shield beside your sink. The product description gives a thickness of about 0.5 mm.
Mounting screws are included, so this set is an option for shoppers who prefer screw installation to adhesive tape. The guards have rounded sides, and the description says they can be used on either side. Wear gloves during installation, as the product information warns that the panels could cause accidental scratches while being handled.
These are side panels rather than a three-sided wraparound guard. They may be a better fit when you need separate shields on the sides of a sink, but they do not offer the Fumete’s described back-and-side coverage. Check the available mounting area and panel dimensions before purchasing.
Pros:
- Two larger 17 x 12-inch panels are included.
- Mounting screws are included.
- Made from 304 stainless steel.
- Rounded sides and a smooth surface are described in the product details.
Cons:
- The panels are thinner than the listed Fumete guard.
- Installation requires handling panels that may have edges capable of scratching.
Verdict: Choose Therwen if you want larger, separate side guards and have a suitable place to mount them with screws.
How to Choose a Kitchen Sink Splash Guard for a Wall
Measure the Sink and Nearby Space
Measure the sink opening and the wall or counter area where the guard will sit. Compare those measurements with each panel’s dimensions, including its height and depth. For the Fumete wraparound guard, pay close attention to the stated 10 x 14-inch drop-in sink fit. A guard that is too large may not sit properly, while a small panel may leave parts of the wall exposed.
Decide How Much Coverage You Need
Two separate side panels can shield the areas beside a sink, while a three-sided design is intended to cover the back and both sides. Think about where splashes actually land in your kitchen. A larger wraparound guard may offer broader coverage, but only if its dimensions and installation style work with your sink.
Choose an Installation Method That Suits Your Surface
The Lewtemi set uses included double-sided tape, while Therwen includes mounting screws and Fumete requires screws that are not included. Consider the surface you will attach the guard to and whether you are comfortable using adhesive or making screw mounts. For adhesive, check the surface requirements and carefully plan placement before sticking the panels in position.
Compare Material and Thickness
All three options are described as 304 stainless steel. The listed thickness differs: Lewtemi is about 18 gauge, Fumete is 16 gauge and 1.5 mm, and Therwen is about 0.5 mm. These measurements help compare the listed construction, but they do not replace checking how each guard fits your setup and intended use.
Think About Cleaning and Removal
Splash guards can collect water and kitchen residue, so consider how you will wipe the surface and reach the area behind it. Lewtemi’s non-porous surface is described as easy to clean, and Fumete is described as detachable for deeper cleaning. With a permanently positioned panel, leave enough access to clean around its edges.
Frequently Asked Questions
Will any of these guards fit every kitchen sink?
No. The panel sizes and mounting methods differ, and Fumete is specifically listed for a 10 x 14-inch drop-in sink. Measure your sink and mounting area, then compare them with the product dimensions before choosing.
Which option covers the most sides of the sink?
Fumete is the only listed three-sided, wraparound design. Lewtemi and Therwen each come as two separate side panels.
Do the products include mounting hardware?
Lewtemi includes double-sided adhesive tape. Therwen includes mounting screws. Fumete uses a screw-on attachment, but its screws are not included.
Can I install a splash guard without drilling?
Lewtemi is the listed adhesive-mounted option and does not require tools according to its product description. Check that your mounting surface is appropriate for the included tape before installing it.
Are these splash guards made from stainless steel?
Yes. Each product is described as 304 stainless steel. Their listed dimensions and thicknesses differ, so compare those details as well as the installation method.
How should I clean a stainless-steel splash guard?
The product descriptions characterize the stainless-steel surfaces as easy to wipe clean. Follow the care guidance provided with the product, and make sure you can reach around the guard to clean its edges and the wall behind it.
Which splash guard is best for a small sink area?
Start by comparing the available wall and counter space with the guard’s dimensions. Lewtemi’s panels are about 14 x 10 inches each, while Therwen’s are 17 x 12 inches each. Fumete’s wraparound design has larger overall dimensions and is listed for a specific sink size.
Final Recommendation
For a straightforward adhesive-mounted setup, the Lewtemi set is the most flexible choice in this group. Pick Therwen if you want larger side panels and screw mounting, or consider Fumete when you have a matching 10 x 14-inch drop-in sink and want three-sided coverage. Measuring your sink and checking the mounting surface should guide your final choice.