A mattress cover for pee needs to do more than sit under a fitted sheet: it should block liquid from reaching the mattress, stay in place, and be easy to wash after an accident. The options below use waterproof layers and fitted-sheet-style skirts, but they differ in surface fabric, care instructions, and whether you get one protector or a two-pack. Check your mattress depth and the washing directions before choosing.
Quick Comparison
| Product | Notable features | Best for |
|---|---|---|
| BEDLORE Waterproof Mattress Protector | Quilted design, TPU waterproof layer, pockets for mattresses up to 18 inches | A soft, quilted feel |
| SheRest Waterproof Mattress Protector | Brushed microfiber, TPU backing, pockets for mattresses 6–18 inches deep | Potty training and frequent washing |
| Bedecor Cotton Terry Mattress Protector | Cotton terry surface, breathable TPU membrane, pockets for mattresses 9–18 inches deep | A thin, towel-like surface |
| BEDLORE 2-Pack Waterproof Mattress Protector | Two protectors, quilted design, TPU layer, pockets up to 18 inches | Keeping a spare ready |
| BEDLORE Waterproof Queen Mattress Protector | Quilted design, TPU layer, pockets up to 18 inches | A single quilted protector |
Our Picks: Best Mattress Cover For Pee reviews
1. BEDLORE Waterproof Mattress Protector: Best Quilted Feel
This queen-size protector pairs a quilted top with a waterproof TPU layer. The quilted design gives it a more traditional mattress-pad look than a thin, flat barrier, while the listed construction is intended to protect against liquid accidents.
Its elastic skirt is designed for mattresses from 6 to 18 inches deep, so it can suit many common mattress styles. Measure your mattress, including any topper, to make sure the pocket depth is a good match. The product is machine washable and calls for low-heat tumble drying; the care directions say not to iron or bleach it.
Compared with the Bedecor cotton terry option, this is the pick for shoppers who prefer a quilted surface over a thin terry layer. The listing does not give a specific fabric composition for the top, so shoppers who want cotton should consider the Bedecor instead.
Pros:
- Waterproof TPU layer is intended to block liquids.
- Quilted design offers a mattress-pad style.
- Deep-pocket skirt fits mattresses up to 18 inches.
- Machine washable with low-heat drying instructions.
Cons:
- The listing does not specify the top fabric composition.
- Check the care label and avoid ironing or bleaching.
Verdict: Choose this BEDLORE protector if you want a washable, quilted option with a wide stated mattress-depth range.
2. SheRest Waterproof Mattress Protector: Best for Regular Washing
SheRest combines a brushed microfiber surface with a TPU backing. The brand describes the surface as soft and quiet and says its breathable, moisture-wicking design helps release heat and vapor while keeping liquid out. These features may be useful for a bed that needs a waterproof layer without a plastic-like surface feel.
The fitted skirt is listed for mattresses 6 to 18 inches deep and is designed to grip all the way around. The protector is machine washable in cold water and should be tumble-dried on low. That care routine makes it a practical option for households managing recurring accidents, including during potty training or incontinence care.
Unlike the BEDLORE options, SheRest does not have a quilted design or a two-pack specified in the product title. Its main appeal is the combination of microfiber, a waterproof backing, and straightforward cold-wash care. As with any protector, fit and proper laundering matter; follow the product’s care instructions to help maintain the waterproof layer.
Pros:
- Brushed microfiber surface with a TPU waterproof backing.
- Designed to fit mattresses from 6 to 18 inches deep.
- Cold-water machine washing and low-heat tumble drying are specified.
- Described as suitable for bedwetting and incontinence care.
Cons:
- The stated care instructions specify cold water rather than warm washing.
- The listing does not specify a multi-pack.
Verdict: SheRest is a strong option to consider if you want a microfiber-surface protector and expect to wash it regularly.
3. Bedecor Cotton Terry Protector: Best Thin, Towel-Like Surface
Bedecor uses a cotton terry surface over a breathable TPU membrane. The terry fabric has a towel-like feel and is described as thin and quiet under a sheet. This design may appeal if you want a surface that feels less like a padded mattress cover.
The fitted-sheet style skirt is listed for mattresses 9 to 18 inches deep. That range starts higher than the 6-inch minimum listed for the other picks, so check your mattress depth before ordering. The care instructions allow cold or warm machine washing, but recommend avoiding bleach and line drying to help preserve the TPU layer.
Compared with the quilted BEDLORE protectors, this one has a simpler, thinner design and a specified cotton terry top. Its care routine is less convenient if you prefer to tumble-dry bedding, since the listing recommends line drying.
Pros:
- Cotton terry surface is described as soft and towel-like.
- TPU membrane is intended to block liquid while allowing airflow.
- Fitted style covers mattresses from 9 to 18 inches deep.
- Can be machine washed in cold or warm water.
Cons:
- Not listed for mattresses less than 9 inches deep.
- Line drying is recommended instead of tumble drying.
Verdict: Pick Bedecor if a thin cotton terry surface matters more to you than a quilted feel or quick tumble drying.
4. BEDLORE 2-Pack Protector: Best for Keeping a Spare on Hand
This listing is for a two-pack of BEDLORE waterproof mattress protectors. Having a spare can be useful when one cover is in the wash, especially if accidents happen more than once. Each protector is described as having a quilted coin pattern, a microfiber top, and a TPU layer intended to block urine, sweat, and other spills.
The all-around elastic skirt is designed for mattresses up to 18 inches deep. The listing says the fabric is certified to STANDARD 100 by OEKO-TEX. For care, it calls for a gentle cold-water wash and low-heat tumble drying, with a maximum dryer temperature of 130°F. It also advises against bleach, ironing, and dry cleaning.
Compared with the single BEDLORE protector, the main practical difference is having two covers in the pack. If you only need one, the single option may be a simpler fit; if a clean replacement matters during laundry, the two-pack offers that backup. The exact care directions are worth checking if your laundry routine usually uses warm water or higher dryer heat.
Pros:
- Two protectors provide a spare for laundry changes.
- TPU layer is intended to protect against urine and other liquids.
- Quilted microfiber design is described as soft and quiet.
- Fits mattresses up to 18 inches deep.
Cons:
- Dryer heat should not exceed the stated 130°F limit.
- Cold-water washing is specified, with no bleach or ironing.
Verdict: Choose the BEDLORE two-pack if you want a spare protector ready while the other one is being washed.
5. BEDLORE Waterproof Queen Protector: Best Single Quilted Pick
This BEDLORE queen protector has a quilted coin-pattern design, a microfiber top and filling, and a TPU waterproof layer. It is intended to shield a mattress from urine, sweat, and accidental spills while adding a soft mattress-pad style layer beneath your sheet.
The 360-degree elastic skirt is listed to fit mattresses up to 18 inches deep. The product description says the materials are certified to STANDARD 100 by OEKO-TEX. For washing, it recommends a gentle cold-water cycle and low-heat tumble drying below 130°F; it also says not to bleach, iron, or dry clean the protector.
This option shares much of its described construction and care guidance with the BEDLORE two-pack, but the title does not specify a two-pack. It may suit you if you want one quilted protector rather than a spare set. If you expect to change covers often, compare it with the two-pack before deciding.
Pros:
- TPU layer is intended to block urine and other spills.
- Quilted microfiber design adds a mattress-pad style surface.
- Elastic skirt is designed for mattresses up to 18 inches deep.
- Machine washable with low-heat drying instructions.
Cons:
- The listing does not specify a multi-pack.
- Care instructions rule out bleach, ironing, and high dryer heat.
Verdict: This is a sensible single-cover choice if you want BEDLORE’s quilted waterproof design but do not need the two-pack.
How to Choose a Mattress Cover for Pee
Look for a waterproof barrier
For bedwetting or other urine accidents, the key feature is a layer designed to stop liquid from reaching the mattress. The options here describe a TPU backing or membrane. A waterproof layer can help protect the mattress, but it still needs to cover the area fully and stay in place. Use the cover according to its instructions and clean it promptly after an accident.
Measure your mattress depth
Check the full depth of your mattress, including any topper, before you buy. Most options here list pockets for mattresses up to 18 inches deep, but their minimums differ: Bedecor starts at 9 inches, while the other options list a 6-inch minimum. A close fit helps the skirt sit securely rather than pull loose or bunch up.
Choose a surface that suits your bed
Surface materials affect how a protector feels under your sheet. Bedecor specifies a cotton terry top with a thin, towel-like design. SheRest lists a brushed microfiber surface, while the BEDLORE options describe a quilted microfiber design. If you want a padded mattress-pad style, consider a quilted pick; if you prefer a thinner layer, compare the terry option.
Match the care instructions to your laundry routine
Accident protection is most practical when the cover is easy for you to wash and dry. The SheRest and BEDLORE listings allow low-heat tumble drying, with BEDLORE specifying a dryer limit for its two-pack and single queen option. Bedecor recommends line drying. Check each product’s instructions before washing, and do not assume that all waterproof covers tolerate the same water temperature or dryer heat.
Consider whether a spare is useful
If you expect to wash the protector often, a second cover can keep the bed protected while the first one dries. The BEDLORE two-pack is the only listing here that explicitly includes two protectors. If you only need one cover, compare the single BEDLORE options or the other individual protectors instead.
Think about noise and breathability
A waterproof layer does not have to feel like a sheet of plastic, but surface construction varies. Several listings describe their protectors as quiet or breathable, and the Bedecor description specifically pairs a cotton terry surface with a breathable TPU membrane. If sound or heat is a concern, pay attention to the surface fabric and the product’s own description rather than relying on the word “waterproof” alone.
Frequently Asked Questions
Can a mattress protector stop pee from reaching the mattress?
These products are described as having waterproof TPU layers or membranes intended to block liquids, including urine. For the best coverage, choose the correct size, fit the protector securely, and follow its care instructions.
Will a waterproof mattress cover make noise?
Several options are described as noiseless or quiet, but the surface materials differ. Bedecor uses cotton terry, SheRest uses brushed microfiber, and the BEDLORE models have a quilted design. Sensitivity to sound and texture can vary, so consider the listed surface style.
How do I know if the pockets will fit my mattress?
Measure the mattress from the bottom to the top, including any topper. Compare that measurement with the listed pocket range. Bedecor is listed for 9–18-inch mattresses; the other picks list a range of 6–18 inches or a maximum depth of 18 inches.
Can I put these protectors in the dryer?
The listings for SheRest and BEDLORE specify low-heat tumble drying. Bedecor recommends line drying. Follow the care instructions for the exact protector you buy, since excessive heat may affect its waterproof layer.
Is a quilted protector better than a thin terry one?
Neither style is best for everyone. A quilted protector may suit you if you prefer a mattress-pad style, while Bedecor’s thin cotton terry design may be a better match if you want a towel-like surface that lies flatter beneath a sheet.
Should I buy a two-pack?
A two-pack can be useful if you want a clean protector ready while the other is being washed. The BEDLORE two-pack is the option in this list that explicitly includes two covers. If you do not need a spare, a single protector may be enough.
Final Recommendation
For a single quilted protector with a stated fit for mattresses up to 18 inches deep, the BEDLORE Waterproof Mattress Protector is a straightforward pick. If you want a spare ready for laundry, consider the BEDLORE two-pack. For a thin cotton terry surface, choose Bedecor, keeping its 9-inch minimum mattress depth and line-dry recommendation in mind. Whichever cover you select, confirm the fit and follow the care directions to help protect your mattress through repeated use.