The best stainless steel grill grid is the one that matches your grill’s exact model and cooking area. Replacement grates can look similar but differ in length, width, shape, and number of sections. The options below cover several grill brands and layouts, so measure your existing grates and check the model list before ordering.
Quick Comparison
| Product | Size and pack | Listed compatibility | Notable detail |
|---|---|---|---|
| Boloda 24 3/8-Inch Cooking Grid | Four grates; 24 3/8 x 14 inches each | Select El Patio and BBQ Grillware models | 7 mm solid stainless steel rods |
| Htanch SF8252 Cooking Grates | Two grates; 16 1/2 x 11 3/8 inches each | Listed Vermont Castings, Kenmore, and other models | Two-piece replacement set |
| Votenli S6505A Cooking Grates | Four grates; 19 3/4 x 6 3/4 inches each | Select Char-Griller and King Griller models | Four-section layout |
| Votenli S65051 Full-Size Grid | One full-size set; 19 3/4 x 27 inches | Select Char-Griller and King Griller models | 7 mm thickness |
| Htanch SF4362 Cooking Grates | Two grates; 15 x 12 3/4 inches each | Listed Broil King, Broil-Mate, Sterling, and other models | Two-piece replacement set |
Our Picks: Best Stainless Steel Grids For Grill reviews
Boloda 24 3/8-Inch Grid: A Heavy-Rod Set for Select El Patio Grills
This four-pack is made for select El Patio gas grills and BBQ Grillware models. Each grate measures 24 3/8 by 14 inches, and the product description lists solid stainless steel rods that are 7 mm in diameter. That relatively substantial rod size is the main distinguishing feature in this group.
The set is intended as a replacement for worn cooking grids, and the listing says installation is straightforward. Its four-piece count and individual grate dimensions make it especially important to compare the arrangement with your existing setup—not just the overall cooking area.
Its main limitation is compatibility: the listed fit covers specific models, including El Patio 510 variations and BBQ Grillware GPF2414NS. It is not a general-purpose grate. The product data also does not list a broad range of grill brands, unlike some of the other options here.
Pros:
- Four grates are included.
- Each grate has a clearly stated 24 3/8 x 14-inch size.
- 7 mm solid stainless steel rods are specified.
- Designed for listed El Patio and BBQ Grillware models.
Cons:
- Compatibility is limited to select grill models.
- You need to confirm both the dimensions and four-piece layout before ordering.
Verdict: Choose the Boloda set if your grill is on the fit list and you need four large replacement grates with specified 7 mm rods.
Htanch SF8252: Two-Piece Grates with a Broad Model List
The Htanch SF8252 is a two-piece stainless steel cooking grid set. Each section measures 16 1/2 by 11 3/8 inches, for a combined listed span of 16 1/2 by 22 3/4 inches. The listing names a wide range of compatible grills, including models from Vermont Castings, Kenmore, Ellipse, Hamilton Beach, and ProChef.
The extensive model list can help if you have an older or less common grill, but it also makes careful checking essential. Compare your grill’s model number and the dimensions of each original grate. A similar total width alone does not confirm that the sections will sit correctly on your grill.
The product data identifies the material as stainless steel but does not state the rod diameter or thickness. If a particular grate thickness is important to your replacement choice, this listing does not provide that measurement.
Pros:
- Two-piece set with individual and combined dimensions listed.
- Compatibility list includes several grill brands and model families.
- Stainless steel construction is specified.
- Original part numbers are provided for comparison.
Cons:
- Rod thickness is not stated in the supplied product details.
- The long compatibility list still requires model and size verification.
Verdict: The SF8252 is a practical option if your model or original part number matches and your grill uses two grates of the listed size.
Votenli S6505A: Four Narrow Sections for Select Char-Griller Grills
This Votenli set includes four stainless steel cooking grates, each measuring 19 3/4 by 6 3/4 inches. Together, the sections cover a listed total area of 19 3/4 by 27 inches. The fit list includes a range of Char-Griller models, along with select King Griller models and the Char-Griller Duo 5050.
The four-piece arrangement is useful when your grill’s cooking surface is divided into narrow sections. It can also mean replacing individual pieces is easier than handling one full-width grid, though the set is sold as a four-piece replacement. The listing does not specify rod thickness, so compare its build details with your needs as well as its measurements.
This model is distinct from the full-size Votenli option below: it is listed as four separate grates rather than one full-size set. Confirm the number and shape of your original parts before choosing between them.
Pros:
- Four sections are included for grills with a divided cooking surface.
- Individual and combined dimensions are provided.
- Listed for numerous Char-Griller models and select King Griller grills.
- Stainless steel material is specified.
Cons:
- Rod thickness is not stated in the product details.
- The four-piece layout will not suit a grill designed for one full-size grid.
Verdict: Pick this set if your listed Char-Griller or King Griller model uses four grates that match the stated dimensions.
Votenli S65051 Full-Size Grid: One Large Replacement Set
This Votenli option is listed as a full-size stainless steel cooking grid set measuring 19 3/4 by 27 inches. The product description specifies 7 mm thickness and identifies it as a replacement for select Char-Griller and King Griller models, including the Char-Griller Duo 5050.
Unlike the S6505A four-pack, this listing describes one full-size set rather than four separately sized sections. That makes the layout a key part of the buying decision. Check whether your grill takes a single full-size grid or multiple smaller grates, and compare the complete dimensions before ordering.
The listing provides a clear thickness measurement, but that alone does not establish fit. Its compatibility range is specific to certain grill models, and the product details do not describe a universal fit.
Pros:
- Full-size dimensions are listed as 19 3/4 by 27 inches.
- 7 mm thickness is specified.
- Designed for select Char-Griller and King Griller models.
- Useful alternative to a four-section layout when your grill takes a full-size set.
Cons:
- Not suitable for grills that require four separate grates.
- Model and dimension checks are essential before purchase.
Verdict: Choose the S65051 if your compatible grill uses a full-size 19 3/4 by 27-inch grid and you want the listed 7 mm thickness.
Htanch SF4362: Two-Piece Grates for Select Broil King Models
The Htanch SF4362 is a two-piece stainless steel grate set. Each section measures 15 by 12 3/4 inches, with a listed total size of 15 by 25 1/2 inches. Its compatibility list covers many Broil King and Broil-Mate models, along with select Sterling, Sliver Chef, and Huntington grills.
This set may suit you if your grill uses two grates of this size and its model appears in the supplied list. The wide range of model numbers is helpful for checking older grill names, but it is not a substitute for measuring your existing parts. The product data does not give a rod diameter or thickness.
Compared with the Htanch SF8252, this set has a shorter listed length and a wider individual grate. The two products are not interchangeable based on brand alone; check the exact measurements and model details for your grill.
Pros:
- Two grates are included, with individual and combined dimensions listed.
- Compatibility list covers several Broil King model families.
- Also lists select Broil-Mate, Sterling, Sliver Chef, and Huntington models.
- Stainless steel construction is specified.
Cons:
- Rod thickness is not stated in the supplied details.
- Its 15-inch length may not match other two-piece replacement sets.
Verdict: The SF4362 is worth considering if your grill is listed and your original two grates match its 15 by 12 3/4-inch dimensions.
How to Choose Stainless Steel Grill Grids
Match the Exact Grill Model
Start with the model number on your grill, often found on its label or in its manual. Compare that number with the replacement grate’s compatibility list. Grill brands may use similar names across models with different cooking surfaces, so a brand match by itself is not enough.
Measure Each Grate, Not Just the Whole Grill
Measure the length and width of every original grid, then note how many pieces make up the cooking surface. A set may list both individual grate dimensions and a combined size. Check both when available, since a correct total span does not guarantee that each section will fit its supports.
Check the Number and Shape of Sections
Replacement sets in this group range from two-piece and four-piece layouts to a full-size grid set. Count your existing grates and compare their shape and orientation with the listing. A full-size grid is not a direct substitute for four narrow sections unless your grill is designed to hold it.
Compare Thickness and Rod Details
Some product descriptions provide a rod diameter or thickness, while others only identify the material as stainless steel. If you want to compare the build more closely, use the measurements that are actually listed. Do not assume that two grates are equally thick just because both are stainless steel.
Confirm the Product’s Part References
When a listing includes original part numbers, compare them with your old grate, grill manual, or parts information. Part numbers can help narrow down fit, but you should still check the physical dimensions and layout before ordering.
Think About Installation and Care
Check that the replacement grid can rest on your grill’s existing supports and that it does not interfere with the lid or other cooking parts. Follow the care instructions provided with the product and your grill. Stainless steel construction does not mean that every grate can be left uncleaned or exposed to any cleaning method.
FAQs
Are stainless steel grill grids universal?
No. These products are listed for specific grill models and come in different sizes and layouts. Check your model number, measurements, and number of grate sections before ordering.
How should I measure a replacement grill grid?
Measure the length and width of each existing grate. If your cooking surface has several sections, measure each one and count the pieces. Compare those figures with the listing’s individual and total dimensions.
What is the difference between the two Votenli options?
The S6505A listing describes four separate grates, each measuring 19 3/4 by 6 3/4 inches. The S65051 is listed as one full-size set measuring 19 3/4 by 27 inches and specifies 7 mm thickness. Confirm which layout your grill uses.
Which option lists 7 mm rods or thickness?
The Boloda listing specifies 7 mm solid stainless steel rods. The Votenli S65051 listing specifies 7 mm thickness. The supplied details for the other three options do not state a rod diameter or thickness.
Can I choose a grate based only on its brand compatibility?
It is safer to check both compatibility and dimensions. A listing may cover several models from the same brand, but grill versions can have different grate sizes or arrangements.
Do these replacement grates come with a complete grill?
No. The listed products are replacement cooking grids or grate sets. Check each product description for the number of pieces included; none of these listings describes a complete grill.
Final Recommendation
For select El Patio and BBQ Grillware grills, the Boloda set stands out for its four-piece configuration and specified 7 mm rods. For a compatible Char-Griller grill, choose between the Votenli four-pack and full-size set based on your original grate layout. The Htanch options are worth checking when your model appears on their broad fit lists. In every case, the best choice is the one that matches your grill’s model, measurements, and number of sections.